Jump to content
SAU Community

Recommended Posts

I recently recieved a link from a website for ET racing Fuels www.etracingfuels.com they have released a range of unleaded race fuel that can legally be used on the Street best thing is that already in Sydney there is 1 service station that has it at a Pump and there is about 7 or 8 in the near future that will be stocking it as well flip side is that it will cost $3.85p/Litre.

Hopefully when they open it up at more service stations the price might drop a little but for a track day or something it would be good 20 Litres for just shy of $80.00.

There is no odour from the fuel when burnt so no give away odour like normal race fuel But as i mentioned it is STREET LEGAL so no need to worry about Police hassles

I will be trying about 10 Litres in the car on Saturday

The address for the Petrol Station is ET Petroleum 47 Lakemba St Belmore NSW

They tested it on a Commodore cup car it put out 199 HP and 355 pounds of torque and with ET102 it put out 215 horses and 400 punds or torque. Nothing was changed or modified with on the car between runs just different fuel. the way i was think even for $10 and maybe 2 litres it would work better than octane booster

Abit expensive for a trackday considering that most people would go thru a solid 60L's in a day ($240 in fuel, ouch!).

As you say, might be good to mix $20/mth in with 98RON just to give everything a clean/burn out in the system.

Might also be a cheap fix for drag racers after a better TS :D

Funny ! I was just having a discussion with my boss today about blending racing fuels and their costs at the moment. Said he used to blend fuel for the big petrolium concerns many years ago and still had the formulas. I said that they have to be non lead based and he said that wouldnt be a problem.Keep you guys posted

2rismo The car they tested with is a Commodore Cup Car so once the engine is built it is then Tagged shut to prevent tampering to make the racing even.

But regardless whatever you obviousley know something we dont

Changing octane level and other fuel properties alone does nothing for power output.

Timing on Commodore cup cars can be changed so my guess is, they advanced it to suiOtherwise the power gain is due to another factor they weren't prepared to divulge.

Adrian

Depending on what engine management the commodore cup car is using, it could possibly adaptively increase and decrease ignition timing according to the knock sensor.

But power gains of 16hp and 55Nm won't be realised in back to back dyno runs... The car has to be driven HARD for a while to adapt to the new higher octane fuel.

a few of us central coast boys in our skylines are going down on sunday to FILL, yes FILL our cars up with 120octane fuel, god it will be fun on the way home, r8un on low boost and see where she goes, if all good, then up comes 25ppound of boost.

rob ive got a water-air ic works well, but thinking of pumping liquid nitro through it, gotta keep those temps down.

see yall soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...