Jump to content
SAU Community

Recommended Posts

  • Replies 184
  • Created
  • Last Reply

Top Posters In This Topic

Are you planning on running both front seats?

As I noticed this in the Sports RWD regs

Complete interior, including dashboard, door panels, headliner etc., mandatory. Rear seat may be removed. Two matching front seats mandatory. Aftermarket seats permitted, but must be fully upholstered. All factory controls must be retained and operative; i.e., lights, signals, horn, windows and wipers.

muahahahha welcome to my world mate :cheers: Thats exactly the same regs as touring cars except we somehow have to get the rear seat back in as well.

Try fitting all that crap back in once you've got a cage in there :)

you need a pair of our race seats, nice and light and hold you inplace.

  BU5TER said:
Are you planning on running both front seats?

As I noticed this in the Sports RWD regs

Complete interior, including dashboard, door panels, headliner etc., mandatory. Rear seat may be removed. Two matching front seats mandatory. Aftermarket seats permitted, but must be fully upholstered. All factory controls must be retained and operative; i.e., lights, signals, horn, windows and wipers.

Sanchez, yes we've got two matching fully upholstered seats fitted, as well as the interior pieces and operative controls.

I spoke to Jason O'Halloran extensively about the build as we were planning it to make sure we're in the green as far as rules go.

  Quote
SATURDAY 19th MARCH 2005

A.M.

7.00 :Competitor gates  

7.30 - 9.30 : Show-N-Shine Registration  

7.30 - 2.30 : Drag Race Registration  

8.30 : Spectator gates open

11.00 - 1.30 : Street Tyre Qualifying  

10.00 - 3.00 : Show-N-Shine  

10.00 - 3.00 : Club Display  

10.00 - 1.00 : Sound Off  

10.00 : Dance Show  

11.00 : Babe Comp  

P.M.

12.00 : Dance Show  

1.00 : Bikini Comp  

1.30 : Motorcycle Stunt Show  

2.00 - 5.00 : Slick Tyre Qualifying  

2.00 : Pro RWD Qualifying Session  

3.15 : Pro RWD Qualifying Session  

4.30 : Pro RWD Qualifying Session  

5.30 : Racing  

6.00 : Glow Off

Adrian

  • 3 weeks later...
  • 2 weeks later...
Guest two.06l
  BU5TER said:
Awesome work getting it ready in time Paul and Stace, I'm really excited to see it out racing again especially with the 405awkw

405awkw......who said that.....could only be one person....should have just posted it in a thread....wait till its tuned on motorsport 103 with a better boost controller (AVC-Rs cant hold high boost). Drives like an animal, almost scary. Have not given it full throttle yet.

P.S. burnouts are for pu55ys who can't get low e.t.'s

  two.06l said:
405awkw......who said that.....could only be one person....should have just posted it in a thread....wait till its tuned on motorsport 103 with a better boost controller (AVC-Rs cant hold high boost). Drives like an animal, almost scary. Have not given it full throttle yet.  

P.S. burnouts are for pu55ys who can't get low e.t.'s

You said it right http://www.skylinesaustralia.com/forums/sh...735#post1251735 there yesterday??? I'm not sure what your talking about

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Details: Turbo Borg Warner EFR 9180 with 1.05 rear housing Upgraded TurboSmart integrated BOV Sanded and powdercoated compressor cover in gloss black Elbow welded with wiggins clamp Speed Sensor(Not included) (Can include oil drain(heat wrapped + titanium intake pipe with almost new filter for a tad extra). Manifold: 6 Boost RB26/30 twin scroll manifold  e-MAP ports drilled into both scrolls(I was using the TAARKS EMAP KIT) Turbo is in excellent condition. Always used Penrite 15w50 Racing oil(Changed less then 2000ks). Also using the Turbosmart OP regulator and filter. Downpipe: 4inch Stainless steel with VBand inlet and outlet clamps(included) Heat wrapped Dual ports for Dyno/Wideband usage Will throw in free 2.5 inch intercooler pipe(2.5inch From turbo outlet to 3.5 inch intercooler) - Powder coated black. Turbo made 563rwkw on mainline hub dyno at around 24-25psi boost - Pump fuel. Will def make over 600kw on e85. Didn't bother as my e-MAP was through the roof with my setup sitting past the choke line. I have a cnc ported and fully built head on my 3.2. Turbine speed saw max of around 109k rpm. I'm running this on my R32 GTR, with AC, and the original power steering pump. The manifold clears the AC lines, ABS, and everything else. Although I had new AC lines because I just wanted new ones and I heat wrapped them as well. This will make more power on a slightly lower capacity motor with a higher PR. And I have since upgraded to a G45-1500. Have pics and videos if need be.  Absolutely nothing wrong with setup. Turbo is in perfect condition. No shaft play or oil leaks at all. All the work was professionally done. The transient response of this is fkn amazing. I cannot rave more about this turbo. If I wasn't chasing 4 figures, I would have kept it. $5000 NZ. Located: Auckland, New Zealand.    
    • I particularly like the look of the John Player Special team. (Thumbnail isn't different but hit play for the clip)  
    • Such a cool collection of cars back then.  
    • Mystery solved, thanks bro Bit of a strange mix, but i dont mind it, still looks good. 
    • nah no problems with bearings or hubs.  just the water pump leak and my AC death
×
×
  • Create New...