RB25 GReddy Plenum, who's fitted one?

[YO880]

i can answer my own question

Rear O-ring - 16412F - the o-ring on the top of the injector

Rear Insulator - 16603F - the insulator on the top of the injector

Front seal - 16603G - the bottom insulator

so i need the 16603G part

according to FAST that is (i forgot i had it)

[MrFlex]

does FAST actually show a picture of the injector? I need to know if there are 2 o rings per injector or just one.

[zephyro90]

where do you put the AAC valve?

[nsmo30tt]

yeah i was wondering aswell if you got the greddy 11mm fuel rail could you put in any top feed 11mm injectors in it

[r33cruiser]

the aac valve goes on the underside of the plenum.

i installed mine about 2weeks ago...but still has not started.

now the injectors dont work :S.

all i can say is make sure u tidy up the hoses under the plenum...it can get a bit messy under there. also with the join to the fmic pipes i had to use a very sharp 90-120 degree silicone joiner. thats because my pipe runs through the side of the bay...and not through the washer bottle.