Jump to content
SAU Community

Recommended Posts

All,

Well, just had the phone call from my tuner, and have the following results

550cc injectors installed, pfc installed and tuned.

240rwkw with 13psi of boost and running 11-1 a/f ratios

boost was between 13.3 and 12.9 all the way to redline

a/f curve was as flat as can be

needless to say i'm REALLY pleased with the results !!!!!!

will post up dyno charts when i pickup the car tomorrow ...

mods are :

S2 RB25DET

gcg highflow turbo

3" turbo back (standard cat)

hks EVC IV boost control

HKS pod in home made cold air partition ( http://www.skylinesaustralia.com/forums/sh...1&postcount=164 )

usual 600mm core FMIC and over the top piping

standard BOV

550cc Injectors (see www.deatschwerks.com for cheap injectors)

PFC + H/C

500hp walbro fuel pump

standard internals

The tuning guy i used really does know his way around a pfc, and obviously can tune to the full potential ... he is a private contractor who does a lot of work for drag and race teams ...

He is happy for anyone to call him and make an appointment, just pm me and i'll pm you his phone number, he rents dyno time from a garage in Mt.Druitt

Cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

nope, standard afm ...

one of the things i was thinking about was upgrading the afm, and spoke to a number of people about it, the upshot was that the kind of power fingures i was looking for , mid 200's, its just not needed if you use a pfc, as you can program the pfc past 5.1v limit from the afm and work from engine revs and boost pressure ...

plus they its getting more and more hard to find for a resonable price ...

cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1193302
Share on other sites

All,

The tuning guy i used really does know his way around a pfc, and obviously can tune to the full potential  ... he is a private contractor who does a lot of work for drag and race teams ...  

He is happy for anyone to call him and make an appointment, just pm me and i'll pm you his phone number, he rents dyno time from a garage in Mt.Druitt  

Cheers

congrats mate. The tuners name wasn't Dave by any chance was it? renting dyno time on Steve's dyno at Premier?

Richard

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1193322
Share on other sites

picked up the car this morning... with the new injectors, its a little more lumpy on idle, but is nothing to worry about ..

drove it around a bit to warm it up, 20 mins of driving and i opened it up, pulled out from some lights, light throttle, into 2nd, about 2300rpm and 30kmh, booted it, and was FIRMLY pushed into the seat right upto the redline ... needless to say there was a HUGE grin on my face .. it revs a lot more freely, builds boost quicker, better response at light loads .. my issue now is traction .. the rears will light up in 2nd about 4500rpm booting it

boost comes on at 3000rpm to 12.9psi and stays at 13psi until 7000rpm will post the dyno graph tonight, but the power curve is VERY good, a nice diagnal line upto 240.3 kw with very few bumps in it ..

Dave (the tuner) has done an EXCELLENT job with the car, and would heartily recommend him to anyone thinking of getting a pfc tune ...

its a totally new car, and gives me a grin all over again !

well worth the mods ..

cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1194482
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...