Jump to content
SAU Community

Recommended Posts

All,

Well, just had the phone call from my tuner, and have the following results

550cc injectors installed, pfc installed and tuned.

240rwkw with 13psi of boost and running 11-1 a/f ratios

boost was between 13.3 and 12.9 all the way to redline

a/f curve was as flat as can be

needless to say i'm REALLY pleased with the results !!!!!!

will post up dyno charts when i pickup the car tomorrow ...

mods are :

S2 RB25DET

gcg highflow turbo

3" turbo back (standard cat)

hks EVC IV boost control

HKS pod in home made cold air partition ( http://www.skylinesaustralia.com/forums/sh...1&postcount=164 )

usual 600mm core FMIC and over the top piping

standard BOV

550cc Injectors (see www.deatschwerks.com for cheap injectors)

PFC + H/C

500hp walbro fuel pump

standard internals

The tuning guy i used really does know his way around a pfc, and obviously can tune to the full potential ... he is a private contractor who does a lot of work for drag and race teams ...

He is happy for anyone to call him and make an appointment, just pm me and i'll pm you his phone number, he rents dyno time from a garage in Mt.Druitt

Cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

nope, standard afm ...

one of the things i was thinking about was upgrading the afm, and spoke to a number of people about it, the upshot was that the kind of power fingures i was looking for , mid 200's, its just not needed if you use a pfc, as you can program the pfc past 5.1v limit from the afm and work from engine revs and boost pressure ...

plus they its getting more and more hard to find for a resonable price ...

cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1193302
Share on other sites

All,

The tuning guy i used really does know his way around a pfc, and obviously can tune to the full potential  ... he is a private contractor who does a lot of work for drag and race teams ...  

He is happy for anyone to call him and make an appointment, just pm me and i'll pm you his phone number, he rents dyno time from a garage in Mt.Druitt  

Cheers

congrats mate. The tuners name wasn't Dave by any chance was it? renting dyno time on Steve's dyno at Premier?

Richard

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1193322
Share on other sites

picked up the car this morning... with the new injectors, its a little more lumpy on idle, but is nothing to worry about ..

drove it around a bit to warm it up, 20 mins of driving and i opened it up, pulled out from some lights, light throttle, into 2nd, about 2300rpm and 30kmh, booted it, and was FIRMLY pushed into the seat right upto the redline ... needless to say there was a HUGE grin on my face .. it revs a lot more freely, builds boost quicker, better response at light loads .. my issue now is traction .. the rears will light up in 2nd about 4500rpm booting it

boost comes on at 3000rpm to 12.9psi and stays at 13psi until 7000rpm will post the dyno graph tonight, but the power curve is VERY good, a nice diagnal line upto 240.3 kw with very few bumps in it ..

Dave (the tuner) has done an EXCELLENT job with the car, and would heartily recommend him to anyone thinking of getting a pfc tune ...

its a totally new car, and gives me a grin all over again !

well worth the mods ..

cheers

Link to comment
https://www.sau.com.au/forums/topic/63421-my-results/#findComment-1194482
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
×
×
  • Create New...