Jump to content
SAU Community

Recommended Posts

running 2530's here on what believed to be an internally stock rb26 . I'd say on stock fuel system 1.0-1.1bar would be about the limit as injectors would really be maxing out . I'm running bosch 044 , 550cc inj , hks fuel rail , adjustable reg , im at roughly 75% duty cycle at 1.2bar .

i would think around one bar or so like 7heaven said you will soon know when you put it on the dyno and i would surgest you dont fit new turbos with out a dyno tune to check a/f ratios (as mine had problems at low throddle settings and needed a safc2 )

your next step will give you big gains ,but do it once ,and do it properly

thats if you choice to

as long as you have good turbo back exhaust and descent induction system

700cc injectors

Apexi pfc

rb20/25afm or z32 afms

well with this you can turn it up and the gains will blow you away

1.3bar should give 400rwhp (easily)and still be a reliable everyday driver and not worry the std internals

this is only my opinion cheers

When I had stock pump and 550cc injectors, the car would only run 1bar before running out of fuel.

Now have GTR pump in tank to 2L surge tank, Bosch 044 from surge tank to rail and Sard 700cc injectors. We have cranked over 1.5 bar through it and its still not coming near the limits of the new pump + injectors.

I'm aware of what there capable of together with an upgraded fuel sys. But im interested to know what power at what boost they can make (safely) on a stock rb26 fuel sys.

When I had stock pump and 550cc injectors, the car would only run 1bar before running out of fuel.

Now have GTR pump in tank to 2L surge tank, Bosch 044 from surge tank to rail and Sard 700cc injectors. We have cranked over 1.5 bar through it and its still not coming near the limits of the new pump + injectors.

HI guys,

Has anyone upgraded to 2530's on a rb26 (stock fuel system/ecu).

What is the most boost you can run before needing to upgrade fuel system/ecu?

HP?

well i'll think most people wont try to run larger turbos without upgrading ecu or atleast trying to compensate for them ,as you could well run into the problem i had with bad air/fuel ratios ,have the car dynoed after install to check a/f and if your a r32 gtr you might be able to remap the ecu.

best guess

hp=mid 300rwhps(to maybe high 300 if your lucky)

boost=1 to 1.2 bar

will all depend on your a/f ratios and ability to tune them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...