Jump to content
SAU Community

94 R33 GTS-t w/ Mods


Recommended Posts

I'm selling my much loved 94' R33 GTS-t, after a year of owning her the GT-R bug has bit me, and I want one! People are welcome to come inspect the car whenever they want, at the moment i have limited internet access so if anyone wants to contact me they are better of txt'ing me on 0402504006.

The car has just had a new spray job and hasn't even come out of the workshop yet, the car is very clean and well looked after.

* ! * ! * PICTURES ARE UP A FEW POSTS DOWN * ! * ! *

The Car;

94' S1 R33 GTS-t manual bought into the country in 98. The car has full compliance, a road worthy has been done 7 days ago and it has just had 6 month rego put onto it.

Motor;

- Full Service done 7 days ago, motor in very good condition

- Neo6 RB25DET from a 2002 R34 GT-T, done around 40,xxxkm's

- Brand new NGK spark pulgs, 7 days old

- 600x300x100 ARE Intercooler, with brand new custom 3" intercooler pipes painted black, brand new silicon hoses. Just donr 7 days ago.

- Custom modified forward facing inlet plenum wich has an aftermarket throttle body (unknown type 3")

- Custom high mount steam pipe section exhaust manifold, sitting the turbo up high next to the motor.

- Custom 3 1/2" Dump pipe

- 3" Apexi N1 Exhaust from dump to end, 8" cannon with 5 1/2" tip

- GCG highflow r34 gtt turbo with t3/4 internals, good for 500+hp..

- Turbo smart dual stage boost controller, high/low boost setting with rocket switch inside

- R32 GT-R Radiator

- Excedy Heavy duty single plate clutch

- TurboXS FRL Bov

- Brand New K&N Pod filter

- Chipped computer

Body;

Brand new spray job done in ford xr6/8 blood orange, less then 2 weeks old, have recipets for over $7000 for the respray/body kit.

- 2 week old R33 GT-R Front bar copy to fit gts-t

- 2 week old 400r side skirts

- 2 week old 400r rear pods

- Genuine R33 GTR R33 Rear wing

- Unique auto sports carbon fibre bonnet w/ bonnet pins ($1200 worth)

- Genuine R33 GTR front bar support

- Carbon fibre wing inserts for the GT-R with

- GTR Grille

- Racing bonnet pins

Suspention;

- Tien HR Coilovers, high/damper adjustable (over $1900 worth)

- Pineapples

- Gtr adjustable Strut brace (front)

Wheels/Tyres/Brakes;

- 18x9 Everim Wheels with low profile Wanal Rubber (no pun intended)

- Brand new brake disks/brake pads (front) (done 500km)

Inside;

- Dual A pillar gauge holding

- Autometer Vac/Boost gauge, Green backlit (30psi)

- Autometer stoich (sp?) gauge

- Aftermarket gear knob

- Aftermarket short shift kit

- Apexi Turbo Timer (pen Style)

- Apexi Power FC Computer (coming in 2 weeks)

- Nismo seat belt pads

Thats about it, has a huge sound system worth over $2000 including rockford fosgate "12 subs, pioneer splits / pioneer 6x9's, Rockfordfosgate Amp, pioneer head unit, full wiring kit.

The car also has autowatch 6 point alarm, including auto start, auto window wind and a few other functions. The car has been dyno'd by the previous owner and has made 262rwkw with a wolf 3D computer and has an 12.9 1/4 mile time ran at willow bank.

If anyone would like any more info please call/txt me.

I am looking for around the $23,500 mark, neg.

Link to comment
Share on other sites

that is awesome.. wayy too cheapp.. cant beleive it isnt gone yet.. wish i didnt buy mine now. :P whoever gets this doesnt have to buy a thing.. good luck with sale mate..

Yeah i know, its a bargain to say the least, people must not be buying much these days... ohh well cheers anyway.. :P

Link to comment
Share on other sites

hey

would you happen to have any pics of the engine and interior. also is that a pic of it before you got it resprayed under you name.

i am really interested but i wont be able to buy this beast for a week or so (am selling mine this weekend)

i might be able to get 19k or round there. what would yo have to take off of it besides the sound system to get it down to about that price without losing anything important that would affect the power??

lastly do you have a engineers certificate for the engine swap and the carbon bonet?

am very interested in getting this car just have to work out a few things first

cheers

Link to comment
Share on other sites

i've seen this car around..must admit..looks shmick in the flesh...liking the new paint job mat... the bonnet looks hawt.

Good luck with the sale man...here's a free bump for yah.

Thanks for the kind words guys!!! :(:D (roger you'll have to pull over some times for a chat :rant:)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...