Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

|PRESA|

dont waste your money on a 1.5k greddy cooler unless you plan to build a dedicated track or drag car and make some real high hp level's, which doesent sound like you will be doing. Since your in Melbourne give race radiators a call in dandenong and you can get very well built custom cooler cores for around $500. The piping and installation will be extra ofcourse. I have a similiar core as this and it work well with over 300rwkw.

The stock cooler does a piss poor efford even with the stock turbo so get rid of that if you plan on getting a highflow turbo.

|PRESA|

dont waste your money on a 1.5k greddy cooler unless you plan to build a dedicated track or drag car and make some real high hp level's, which doesent sound like you will be doing. Since your in Melbourne give race radiators a call in dandenong and you can get very well built custom cooler cores for around $500. The piping and installation will be extra ofcourse. I have a similiar core as this and it work well with over 300rwkw.

The stock cooler does a piss poor efford even with the stock turbo so get rid of that if you plan on getting a highflow turbo.

Your right, but if hes on a budget he can still run 12psi safely on the stock IC.

But for another 700$ might aswell get a FMIC setup localy.

Thanks for the help guys.

The reason I was looking into a Greddy cooler is that I noticed Nengun is selling them for a little over $1k delivered.. Till about march my budget is $1k

I was thinking about getting a PFC althought I would tune it for the stock cooler/turbo, then when I add the fmic and hi-flow I'll need an additional tuning.

Therefore I thought if I bough the minor things 1st then worked my way to the PFC i'd save on the tuning side of things.

I had my car dyno'd a month back and got 163.3rwkw (12psi, stock cooler, stock exhaust) as we kept doing a couple runs after that the power would drop to 159rwkw to 153 rwkw, he then introduced me to the inlet pipe from the cooler and it was dam hot!!! This caused by the cooler, in the tuner's experience he suggested 1st thing to do is get the 3" turbo back exhaust then FMIC.

So far I have the 3" dump/front and cat, stock 2.5" cat back with a muffler (it came with the car) finishing the cat-back won't be a problem, I'm just tossing up between a Greddy FMIC (I rather quality/performance than worry about the price on a locally made) or PFC.

Thanks for the help guys.

The reason I was looking into a Greddy cooler is that I noticed Nengun is selling them for a little over $1k delivered.. Till about march my budget is $1k

I was thinking about getting a PFC althought I would tune it for the stock cooler/turbo, then when I add the fmic and hi-flow I'll need an additional tuning.

Therefore I thought if I bough the minor things 1st then worked my way to the PFC i'd save on the tuning side of things.

I had my car dyno'd a month back and got 163.3rwkw (12psi, stock cooler, stock exhaust) as we kept doing a couple runs after that the power would drop to 159rwkw to 153 rwkw, he then introduced me to the inlet pipe from the cooler and it was dam hot!!! This caused by the cooler, in the tuner's experience he suggested 1st thing to do is get the 3" turbo back exhaust then FMIC.

So far I have the 3" dump/front and cat, stock 2.5" cat back with a muffler (it came with the car) finishing the cat-back won't be a problem, I'm just tossing up between a Greddy FMIC (I rather quality/performance than worry about the price on a locally made) or PFC.

Tell your " tuner " hes a toss head.

Why the heck are you wasting your money on a greddy? get a localy made one. Hi flow and PFC then tune it. Dont tune it with stock turbo , its aw aste

get a full 3" exhaust

...Get the Intercooler once you start boosting past 1K boost....

...FMIC is just cooling the turbo/engine....

The VL's ran 12psi with NO intercooler for 300,000KLMS! ....

 

1k of boost? So thats one kelvin, or 1,000 unit? boost. I guess you mean a bar of boost:)

Yeh FMIC cools the inelt air for the engine, and it important to remember that whilst the std cooler isnt a thing of beauty, it isnt all that bad either. Though I think (my thoughts...it seems you diagree) you are wasting your time and money getting a hi-flowed turbo and paying for the tuning of a Pfc when you are still running a std cooler.

The std cooler will struggle to pull the inlet temps down to anything under 50deg C, so when you tune the PFC you wil not be able to run the sort of ignition the engine could handle of you were running an inlet charge only 1-10 deg C within ambient temps.

Also with being such a compromised IC standard, experience with my old std ID is that whilst your turbo may be cranking out 15 psi you engine will be lucky to see 13 psi, more like 12psi:( So its not just the cooling but also the pressure drop, and if the airflow to the std cooler is oridinary and would have to be improved.

As for Vl turbos runnino no IC for 300,00kms, well sure anything can work, doenst mean it should be done. I can have my car tuned to run on std unleaded with 1.2bar of boost, the car will have jack all ignition and plenty of fuelling and be a pig, but it can be done...in fact i think i could probably do that with my current conservative tune:(

With a good IC your tuner can get much more bang for your buck when tuning the car:) At least talk to your tuner and see what he would charge to re-tuned the engine once it has found an extra 2-3 psi because of new intercooler and also wind a biut more ignition into it as a result of nice cool/dense inlet charges:)

Not saying anyone is wrong, just soem thoughts which havent been raised in this thread...

1k of boost? So thats one kelvin, or 1,000 unit? boost. I guess you mean a bar of boost:)

Yeh FMIC cools the inelt air for the engine, and it important to remember that whilst the std cooler isnt a thing of beauty, it isnt all that bad either. Though I think  (my thoughts...it seems you diagree) you are wasting your time and money getting a hi-flowed turbo and paying for the tuning of a Pfc when you are still running a std cooler.

The std cooler will struggle to pull the inlet temps down to anything under 50deg C, so when you tune the PFC you wil not be able to run the sort of ignition the engine could handle of you were running an inlet charge only 1-10 deg C within ambient temps.  

Also with being such a compromised IC standard, experience with my old std ID is that whilst your turbo may be cranking out 15 psi you engine will be lucky to see 13 psi, more like 12psi:(  So its not just the cooling but also the pressure drop, and if the airflow to the std cooler is oridinary and would have to be improved.

As for Vl turbos runnino no IC for 300,00kms, well sure anything can work, doenst mean it should be done. I can have my car tuned to run on std unleaded with 1.2bar of boost, the car will have jack all ignition and plenty of fuelling and be a pig, but it can be done...in fact i think i could probably do that with my current conservative tune:(

With a good IC your tuner can get much more bang for your buck when tuning the car:)  At least talk to your tuner and see what he would charge to re-tuned the engine once it has found an extra 2-3 psi because of new intercooler and also wind a biut more ignition into it as a result of nice cool/dense inlet charges:)

Not saying anyone is wrong, just soem thoughts which havent been raised in this thread...

Thanks Roy, So I guess your suggesting getting a FMIC first? Before the PFC. Would you suggest a good FMIC as being that of a Greddy ? Which are still reasonably priced compared to HKS or Blitz.

Once the cooler is fitted and cat-back is in, I'll look towards the PFC and turbo setup. My thoughts anyway.

By the way if you look at the "Greddy" link I posted, I was looking towards the Greddy R-SPL cooler retailed at $1044.67 delivered.

Strange but for the V-SPL which is for light modified cars it's more dearer than the R-SPL which is recommended for better cooling of high performance cars etc.

I have plans for my car so the high performance cooler I will grow into.

By the way if you look at the "Greddy" link I posted, I was looking towards the Greddy R-SPL cooler retailed at $1044.67 delivered.

Strange but for the V-SPL which is for light modified cars it's more dearer than the R-SPL which is recommended for better cooling of high performance cars etc.

I have plans for my car so the high performance cooler I will grow into.

Are you really that bloody stupid? DO NOT BLOODY SPEND 1050$ ON A FRIKING INTERCOOLER!

Get a custom one, it will actually flow better if you go 100mm core which is now cheap customly made .

All up maximum 699$

You do not learn, go do whatever you want you also time wasted me that you wanted a short shifter then acted like you sold your car .. remember that?

Great, i reckon this guy will never learn and dont deserve to own a turbo skyline which such low knowledge after 20+ posts of useful info.

YOU DONT NEED SUCH AN EXPENSIVE INTERCOOLER!

Bloody i run no IC with Water Injection :wassup: sometimes..

You dont need a intercooler if your planning to run low boost. but for another 600 odd dollars get yourself a kit custom made pipes and a ebay intercooler for 250$ or so !

Roy, i mean 1 kg/cm2,also this is what japanese gauges read.. people get it confused with Bar :D

good luck. i have had enough of this nonsense...

Wow talk about off the hook.

IMO the hybrid copys are good enuff.My car is reciving 1,some just want a brand name and i can see that,research and development and quality craftsmanship that has been proven time and time again.And the ease of fitment for presa that only comes with a pre fabricated unit.

But im like DoriDori.Why pay sooo much for it when you know that the cheaper option is just as good.get a spray can and jig to spray a logo on it.

My 2 pesos

Wow talk about off the hook.

IMO the hybrid copys are good enuff.My car is reciving 1,some just want a brand name and i can see that,research and development and quality craftsmanship that has been proven time and time again.And the ease of fitment for presa that only comes with a pre fabricated unit.

But im like DoriDori.Why pay sooo much for it when you know that the cheaper option is just as good.get a spray can and jig to spray a logo on it.

My 2 pesos

Are you really that bloody stupid? DO NOT BLOODY SPEND 1050$ ON A FRIKING INTERCOOLER!

Get a custom one, it will actually flow better if you go 100mm core which is now cheap customly made .

All up maximum 699$

You do not learn, go do whatever you want you also time wasted me that you wanted a short shifter then acted like you sold your car .. remember that?

Great, i reckon this guy will never learn and dont deserve to own a turbo skyline which such low knowledge after 20+ posts of useful info.

YOU DONT NEED SUCH AN EXPENSIVE INTERCOOLER!

Bloody i run no IC with Water Injection :wassup:  sometimes..

You dont need a intercooler if your planning to run low boost. but for another 600 odd dollars get yourself a kit custom made pipes and a ebay intercooler for 250$ or so !

Roy, i mean  1 kg/cm2,also this  is what japanese gauges read.. people get it confused with Bar :D

good luck. i have had enough of this nonsense...

You are a fkn dumb c@nt watch how you speak d!ck head, I'm here asking questions about cars.

Firstly I wasn't gonna spend money on your short shifter sh!t when you originally wanted $125 for it then you ask for $130. You got a mouth to be mentioning things like that on this forum. As I said earlier I'll pay money for quality and your short shifter wouldn't be worth a bar of soap. If you got any more issues you have my number feel free to call me!

You insult the forums with your posts, demanding people what they should do, there are two kinds of people on this forum, People who know what they're talking about and people who think they know what they're talking about.

Study your knowledge before you give advice next time.

You are a fkn dumb c@nt watch how you speak d!ck head, I'm here asking questions about cars.  

Firstly I wasn't gonna spend money on your short shifter sh!t when you originally wanted $125 for it then you ask for $130. You got a mouth to be mentioning things like that on this forum. As I said earlier I'll pay money for quality and your short shifter wouldn't be worth a bar of soap. If you got any more issues you have my number feel free to call me!

You insult the forums with your posts, demanding people what they should do, there are two kinds of people on this forum, People who know what they're talking about and people who think they know what they're talking about.

Study your knowledge before you give advice next time.

HA HA HA HA YOUR A TOTAL CLOWN!

Soap for my shifter kits ? No... is it why i sold around 6 of them and got good results ? first of all you never saw the kits.. so zip it.

Quality? what is so bad quality about a hybrid copy? have you ever owned one? or even seen a greddy in real life? I bet you couldve tell the differnce besides the logo.

Atleast im not the one asking q's about what i should do to my car..

HA HA HA HA YOUR A TOTAL CLOWN!

Soap for my shifter kits ? No... is it why i sold around 6 of them and got good results ? first of all you never saw the kits.. so zip it.

Quality? what is so bad quality about a hybrid copy? have you ever owned one? or even seen a greddy in real life? I bet you couldve tell the differnce besides the logo.

Atleast im not the one asking q's about what i should do to my car..

We'll be in contact.

Thanks Roy, So I guess your suggesting getting a FMIC first? Before the PFC. Would you suggest a good FMIC as being that of a Greddy ? Which are still reasonably priced compared to HKS or Blitz.

Once the cooler is fitted and cat-back is in, I'll look towards the PFC and turbo setup. My thoughts anyway.

presa, the greddy IC you are looking at is the sidemount as far as i can see. they have an R-spl core.

this thread is funny.. seriously - if the guy wants to spend money on an intercooler - he is allowed isn't he? People spend $3000 on rims for their car, and yet the engine stays stock :D but that's their business what they've chosen to spend the money on for their car.

Anyhow Pressa, you're best off with both a good intercooler AND a full aftermarket ecu to run your upgraded turbo..

SAFC might work on a larger turbo but you'd really be limiting what you can do with your car for a while, or even the power you are putting. Ultimately you're putting on a larger turbo for more power correct? why limit that? best to wait until you have a little more cash and do it all properly at once. You will save money there too.. one tune, one trip to a garage to get everything fitted, etc.

Running a stock cooler with any larger turbo is probably NOT a good idea. It might work on the street, but do you really want to risk your engine or $1500 nicely highflowed turbo on a hot day or something?

doridori32,

What's you'r problem, | PRESA | is trying to get help with his car here and you'r jibbering on about absolute sh!t. you'r last post is total off topic and no one care's about you'r short shift's so stop talking about them.

| PRESA |

Don't worrie about him, do what you think is best I my self would recommend a front mount cooler to get thoes inlet temps down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...