Fitting pineapples

[skyla]

Hey all,

please don't laugh at me too much with this one. :Oops:

I got a set of pineapples that I would like to fit to my R33 GTS25, the problem is I'm not sure where to fit them and my mechanic has never seen them before, and hasn't got much of a clue.

I have done a quick search and haven't found the answer to my question.

I know there is 2 different settings one for drift and one suitable for drag. I would like to put the pineapples in the drag position, as when I launch the car and start to apply more power the car suffers from axel tramp badly.

So if somebody could kindly give me a step by step run down of where and how to install the pineapples, it would be very much appreciated.

thanks

Rachael

[Yorik]

Hi

This article/how-to from whiteline is what you are looking for, once you install them, you will see how the size of the rings is important to fitting them..

http://www.whiteline.com.au/docs/instructs...203a_KCA349.pdf

HINT: If you cut a ring, get a large hose clamp and fit it around the ring to keep it in place..

As an idea, if you have never doen this before it might take an hour or two, if you have done it before, then 45 minutes is about right for all four pineapples fitted drive in drive out..

Enjoy!!

[skyla]

Cool, :thankyou: thanks heaps for the link

[predator]

installing for r33 is in the tutorial / FAQ section