Jump to content
SAU Community

Has anyone broken a compressor wheel before?

Lithium

By Lithium,
in Engines & Forced Induction

 Share

Recommended Posts

Lithium Grand Master

Lithium

Posted
Posted

I've finally sorted out a new turbo for my car so pulled off the stock turbo off my R33 Spec2 which crapped out at the drags a couple of months back - and pulled it apart to find out what the damage was. Turns out that there is a bit missing from the nylon compressor wheel!!!

This isn't something I've heard of, and I'm not too sure what could have caused it - I always run it with a filter. Anyone seen this before? Should I be concerned about where the nylon went? (The ballbearing core is stuffed too...)

Cameron_Datto Contributor

Cameron_Datto

Posted
Posted

I have same Turbo and My Turbo had the same things happen as yours ,, piece missing on the Plastic Compressor wheel .. ALso Turbine SHAFT where the BAll BEARINGS run on had excessive wear on about 180deg of ball bearing running contact face on both bearings BUT the other 180deg of the bearing contact was normal this would make the turbine shaft to run off center when it rotated ,due to the Egg shaped wear on the shaft

.. Just before the Ceramic Wheel let go ,, there was excessive oil smoke from the exhaust .. also it idled higher i guess it was from the pieces of the compressor wheel jamming throttle body ,, when i started to boost it was noisey from the Turbo and then no boost..the CERAMIC wheel said BYE BYE .. Just before this all happen i have driven the car HARD the previous time i used it .. And i thought what may have caused it was that the oil was to thin and broke down under the high temps causing the bearings to wear .. and put it out of balance which caused the compressor wheel to brake .. which made the balance worse causing the seal to leak .. then the ceramic wheel lets go ..

if any one has other ideas on what happened let me know .. as i havent got a reason for the Oval shaped bearing wear on the turbine shaft .. which i recon is the start of the problem .... DID YOUR Ceramic Wheel let go ? Cheers Cam

Lithium Grand Master

Lithium

Posted
  • Author
Posted

Some of that sounds similar - I get a click when rotating the wheels, but the ceramic exhaust wheel is perfectly in tact. I shut the car off as soon as I heard dodgey noises from the bearings, and the only time it has moved again was to drive it on the trailer to tow home. When it was idling on the trailer it sounded perfectly normal.... I'm kind of worried about where the nylon may have got though.

Has your engine sustained any damage?

Cameron_Datto Contributor

Cameron_Datto

Posted
Posted

i Dont believe its any thing to do with the air filter ..because of where the compressor wheel brakes .. most of the chunky bits would end up in the intercooler inlet side while the finner bits would filter though that .. so the internal damage of the engine would be minimal ,, Due to being Nylon .. BUT if you dont clean out you intercooler you might have problems ..

Lithium Grand Master

Lithium

Posted
  • Author
Posted

Now that I think about it, I think I know what happened to the broken piece of compressor - we were sure we heard something drop out when we removed the piping which comes off the compressor and heads towards the intercooler, but couldn't work out what it would be. There is probably a piece of compressor wheel lying on the floor in my garage somewhere :rofl:

It was only later when we pulled the turbo apart that we realised what had happened inside.

Also, just out of interest - the turbo otherwise appears perfectly healthy. The amount of shaft play is normal for a healthy turbo, and there was NO smoke.

r33gtst196 Contributor

r33gtst196

Posted
Posted
I have same Turbo and My Turbo had the same things happen as yours ,, piece missing on the Plastic Compressor wheel  .. ALso  Turbine  SHAFT where the BAll BEARINGS  run on had excessive wear on about 180deg of ball bearing running contact face  on both bearings BUT the other 180deg of the bearing contact was normal   this would make the turbine shaft to run off center when it rotated ,due to the Egg shaped wear on the shaft  

..     Just before the Ceramic Wheel  let go ,, there was  excessive oil smoke from the exhaust ..  also it idled higher i guess it was from the pieces of the compressor wheel jamming throttle body ,, when i started to boost it was noisey from the Turbo  and then no boost..the CERAMIC  wheel said BYE BYE ..      Just before this all happen i have driven the car HARD the previous  time i used it ..     And i thought what may have caused it was that  the oil was to thin and broke down under the high temps causing the bearings to wear ..   and put it out of balance which caused  the compressor wheel to brake  .. which made the balance worse causing the seal to leak    .. then the ceramic wheel lets go ..

 if any one has other ideas on what happened  let me know ..  as i havent got a reason for the Oval shaped bearing  wear on the turbine shaft .. which i recon is the start of the problem  .... DID YOUR Ceramic Wheel let go ?    Cheers Cam

What boost were you running when ya did this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hexi
      Dumb rich kid tries modding for the first time

      By Hexi · Posted

      Thats why I stay far, far away from Eastwood. only go there if I wanna eat Korean food 
    • Hexi
      Dumb rich kid tries modding for the first time

      By Hexi · Posted

      I have to agree like, yesterday, I was driving down the warringah freeway towards the bridge when this jackass driving a beaten up Honda civic cut me off so suddenly it made me almost yank the wheel to avoid him hitting my car. Honestly and he had the NERVE to flip me off (or some other gesture Idk). Im a calm guy, but really some people just dont deserve to have a license, let alone be allowed to drive on densely populated roads/highways. If youre gonna cut through lanes at least use the damn turn signal
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • MBS206
      Dumb rich kid tries modding for the first time

      By MBS206 · Posted

      I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 🤗
×
×
  • Create New...