Jump to content
SAU Community

Recommended Posts

I can never understand why people do this!

If the engine bay looks dirty then use a rag and clean it by hand!  

water and electrical connections do not mix!!!!!!!!!

I live on a dirt road. Cleaning with a rag isn't an option.

Besides, other reasons could be oil leaks etc. May have to degrease to find where the oil is really coming from.

There are many reasons to do it. Just gotta do it right so not to harm anything.

High pressure however is a HUGE no-no near engines IMO. If I can get 3 inch of clay of a dirt bike engine that has baked on there, with not more than garden house pressure, I can't see the need for a high pressure hose on a car engine!

Ah I knew I read something on here not long ago.

Here is a guide for detailing your car.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=47397

and http://www.carcareonline.com/viewarticle.aspx?art=4 was one of the links within the thread.

thx heaps for the feedback guyz,

yeh im definately not doing that again.

anywayz so ive disconneted all the terminals and ive let them sit

will that be enough to solve the problem?

btw where is the coil pack? and yes i do have a pod but being the dikwad i am i didnt cover it, how do i fix it?

dude, if u have wet the pod filter. STOP running the car...you want to get all the water out of everywhere first. It seems you have been running it a fair bit, so with a bit of luck it is just the coil packs.

My advice would be to not start the car until you have checked out the things mentioned above.

Do a search on coil pack servicing

Pod filter - I'd disconect it, sit in the sun until it is TOTALLY dry. See if water has gone up the pipe between the pod and the engine, if it has, might pay to remove the pipe, make sure it's all gone.

If you have water in the engine it is a VERY bad idea to be turning it over.

I am used to drowning dirt bikes, but not cars, I would assume it's the same idea, any place that water may have got, check it out, clean it out, dry it out.

On bikes after all that, you take the plugs out and turn it upside down and turn the engine over to get it all out....but I am guessing you don't do that with cars! hahaha (how funny would that be tho..*mental image*)

i know what your saying ? i say there is water traped under your coil packs as ive had the same thing happen to me i just pulled all my plugs out clean the packs with CRC and plugs put all back and done problem fixed ? and while your plugs are out turn your motor over blow any water or moist out of the bores if u have any good luck with things

When cleaning the engine bay a high pressure spray and degreaser, I made sure to cover the air filter with a plastic bag. I forgot to take the bag off afterwards but luckily I remembered just before I drove off. The car would have had a hard time breathing that's for sure.

We used to jet wash engine bays in one of my detailing jobs. Cover the fuse box (if under in the engine bay) and the alarm siren box. Quick flick over with a truck wash canister, then three times accross the bay with the jet wash to form not much more than a mist.

We always left the engines running as it would be hopeless trying to start it if something got wet.

Any idea of quantity of water or time spent purely on the engine bay with the jet wash? Seconds or minutes?

Hope it sorts itself out mate

I would get a high pressure airline and pull all of your electrical connectors apart and blast all the moisture out then spray with WD40 or similar product. Pull the coil packs out and do the same to them. dry your fully sick pod filter and put that back on.... You cant have done much in the way of damage. If the car sounds like it is missing its most likely because there is water in the coil packs and its shorting out... Just be carefull next time you wash...

P.S unless you had the hose on the air filter the engine wouldnt suck in enough water to hydrolic lock the engine so dont worry about that dude.

dry her out and then take it for a good run to get everything hot and the remaining water will evaporate and you be sucking the doors of HSV's and WRX's before you know it..

ENJOY!

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They are what I will be installing. 640s for me.
    • Hmm... From my experience you get about 0.25° camber change per mm of RUCA length change. So, to correct from -2.5 up to less than -1° (or, more than -1° if you look at the world as a mathematician does) then you'd be making 6-8mm of length change on the RUCA. From a stock length of 308mm, that's 2-2.5% difference in RUCA length. My RUCAs are currently very close to stock length - certainly only 2-3mm different from stock. I had to adjust my tension arms by 6mm to minimise the bump steer. That's 6mm out of 210, which is 2.8%. That's a 2.8% change on those, compared to a <1% change on the RUCAs. So the stock geometry already has worse bump steer than is possible - you can improve it even if you don't change the RUCA length. If you lengthen the RUCAs at all, then you will definitely be adding bump steer. Again, with my car, I recently had an unpleasant amount of bump steer, stemming from a number of things that happened one after another without me having an opportunity to correct for them. I only had to change the tension arm lengths by 1mm to minimise the resulting bump steer. (Granted, I also had to dial out a lot of extra toe-in in the rear, and excessive rear toe-in will make bump steer behaviour worse). Relatively tiny little adjustments having been made - the car is now completely different. Was horrifying how much it wanted to steer from the rear on any significant single wheel bump/dip. And it was even bad on expansion joints on long sweepers on freeway entry/exits, which are notionally hitting both rear wheels at the same time. My point is, the crappy Nissan multilink is quite sensitive to these things (unlike the very nice Toyota suspension!). And I think 99.75% of Skyline owners are blissfully ignorant of what they are driving around on. Sadly, it is a non-trivial exercise to set up to measure and correct bump steer. I am happy to show my rig, which involves nasty chunks of wood bolted to the hub, mirrors, lasers, graph paper targets and other horrors. Just in case anyone wants to see how it is done. I'll just have to set it up to take the photos.
    • What do you have in that bad boy ? Ill go with the 725cc since I'll be going with Nistune ( would definitely like more engine protection but Haltech is too far out of reach at the moment... plus, Ill probably have a pretty safe tune as its a daily, not gonna be chasing peak power 24/7 ahahah ). Are Xspurt a safe choice?  Pete's great. He didnt mention anything about traction arm length so I reckon it may be good. When I get some new wheels/tire later down the road I'll ask him about it and get his opinion on em. I heard from Gary that you've got the bilsteins too, are you running the sway bars too? and what other suspension goodies do you have installed or would recommend?
    • In true Gregging style...  
×
×
  • Create New...