Jump to content
SAU Community

Recommended Posts

well, as adam said, a stock(driveline wise) aus 31 will be wikid to slide.

they are relatively cheap. but in the end, if your gonnaslide it, things will come up and it gets a bit more expensive. but hey, my RB30 has copped limiter bashings on 40 degree days and she is still going strong.

only mods to my car are shocks, springs, front sway bar and strut brace, minispool, intake pipe, muffler.

joelstevetandem7as.jpg

40771552IMG_2911.jpg

40771484IMG_2649.jpg

40771195IMG_2017.jpg

link0ge.gif

Dsc02372.jpg

  • 1 month later...

Just a piece of advice, the bigger/heavier the car, the dearer everything else will be. Tyres, a diff to take the punnishment, the power needed to keep the car in a slide, gearbox, everything.

If you want to go sideways in a car pick something fairly light to begin with. 4 cylinder will keep things cheap. When you look at AE86's and even sivlias to a degree they are a perfect example. If you only have $5000 I doubt you'll have a decent 31 ready to drift if you also don't have much experience with cars yet.

The other unfortunate thing is that you'll probably have to compromise with a road/drift car. Most things you'd do to a drift car wouldn't be unsuitable/legal for the road.

I've had a turbo silvia which was great and currently own a 31 wagon, which I can tell you now is no nimble piece of equipment especially when close to standard form

If I had to do everything all over again I would get an AE86 or Dastun stanza if you can handle the looks. The AE86 has obvious potential, the stanza is the lightest shell a L20b series 2 bluebird motor will drop straight into, bang a webber on it and spend the rest of your money on wheels/exhaust etc...

For a compromise car I'd say a series 3 bluebird TRX with the CA20 engine. Pleanty of room for mates, reasonably well appointed, not too heavy. The possibility to easily upgrade to a CA18DET down the track would make it a good choice.

I love my 31 but I only chose it as a tow car for my stanza race car and not as a drivers car. That said you can have fun in just about anything if you want to.

R31 as a tow car isn't a great idea - the maximum towing capacity is 1100kg. You won't get a Stanza and a trailer under that. Worse problem is that Hayman Reece class 4 towbar for R31s are only rated at 850kg... it must only have been the factory towbar rated to 1100kg. I wouldn't like to pull that much weight in one - I towed my car trailer unladen (~500kg) in my old SIII R31 and it wasn't nice - you could feel the car being pulled around by the trailer, although my ride height might not have helped that.

L18/20 into 1200 isn't exactly easy, but its dead simple into a 120Y or Sunny. You can use 180B or Stanza crossmembers in those for a bolt-in fit.

you should pick up a decent r31 for around 2-3k

if ur lucky see if you can get a silhouette with a man tranny

but watch out, my cuz bought an r31 sill with a man tranny, and he had 2 spend big on getting it fixed up (it wash shot...it dropped fluid, the gears were rooted, in the end he spent about a grand getting it properly redone and getting a full service on the engine diff and gearbox

and if you get a auto make sure it doesn't get stuck in certain gears ... if i hammer our r31 when rolling (like pulling into a parking area when wet, and getting the back end to go sideways...hehehehehe) it will get stuck in second gear

to get it out again i need to shut down the engine and then start her back up again

but there is no need to worry, just make sure you spend a little while looking 4 a good quality one cause as has been said numerous times, these cars can cop a lot of shit

even though they have relativly low power (compared to like the new 1.8l corolla that has 145kw compared to the 114kw of the r31) the torque of these beasts will leave a corolla in the dust

they take of relativly quick and can be redlined no worries (when mum drives it she often redlines it on take off ... hehe)

they are fun as 2 drive, and especially when turning right from a stop they can leave a nice big black mark (that is without lsd ... the engine rotates, when in the car, clockwise, applying more power to the right hand side, making it easier to leave smoke when turning right)

hopefully all the pros and cons of this car make you buy one, cause they are fun as 2 drive, can cop a lot of shit, and leave a lot of other cars on the road in the dust

dad has pulled in excess of a 1500kg with our r31 (and so have i) and yes the trailer makes it pull around a bit, but as a tow car i reckon they are awesome

the midrange to topend torque means that you can pull around a tonne, and still manage to overtake cars at around 130kmh (from about 90kmh)

we have had our car fully laden, towing a trailer (around 800-900kg) and still managed to overtake cars easily

I really wouldn't recommend exceeding the maximum towing capacity of the vehicle or towbar. Its illegal and unsafe. Its only a matter of time before physics and metal fatigue catch up with you...

but I still miss my R31 as a daily driver. They're a good car, especially for the price.

The type of trailer and positioning of the load is a major factor on a cars ability to tow. I use a light weight trailer and a stripped out stanza and never have any trouble. I would say manufacturers would be more than a little conservative when rating a vehicle's towing ability.

Regarding the L20B into 1200/sunny/120y. I've heard the crossmember thing for the sunny's but I think the L20b is too tall with standard engine mounts. I heard it just hits the bonnet but L18's are OK as they are smaller stroke. Could be wrong but that's what I was told.

Go little datsuns I say!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...