Steering rack boot seals - part number for you

[predator]

Ok, well today I replaced the steering rack boots on my R32. My other ones had kind of split in half on both sides.

So anyhow, go down to your local Repco store, and you can get them - the Repco part number is RRB033 for each (they are repco branded). They cost me $14.50 each, and are pretty much an exact match.

I am pretty certain these would be same as R33 as well (maybe that is why there is an 033 on the end?)

[InterCooL]

I am pretty certain these would be same as R33 as well (maybe that is why there is an 033 on the end?)

bumping this thread to let any searcher know that this part will definitely not fit an r33 s1 gtst...

[T04GTR]

no the 33 ones are smaller

[InterCooL]

thats right. i used the universal one, part rrb000. the end sizes are fine, i'm a bit unsure if it is long enough, but seems to be holding up ok so far

[95SKY]

i used rrb000 universal for 32 gtr rack boots.

[SysLink67]

Ok well now im confused!!! I have a 1990 R32 GTR and need to replace the steering rack boots on my R32.

Which part do I use from repco :

Repco part number is RRB033 for each (they are repco branded). They cost me $14.50 each, and are pretty much an exact match. WHICH PREDATOR said to use

OR rrb000 universal for 32 gtr rack boots. that 95SKY recommended to use?

any help? also anytips on how to do it? where to jack to get best access? tools needed? time taken etc.

Any help would great.

cheers

rob