Jump to content
SAU Community

Recommended Posts

yes it can be registered provided you have all the neccessary paperwork for it. its not that hard but you would have to make a custom engine mount for it. you would still use the getrag box with the motor. I briefly considered this option once.

Link to comment
https://www.sau.com.au/forums/topic/65221-rx7-with-2jzegt/#findComment-1219760
Share on other sites

i have a magazine article with a yellow rx7 series 6 with the supra tt engine, looks tough as, so different, havent read the article in detail yet so unsure of the power but the 2 turbos look huge, like 3240's or something...

ben...

Link to comment
https://www.sau.com.au/forums/topic/65221-rx7-with-2jzegt/#findComment-1219974
Share on other sites

I have a really old zoom mag. Where they fitted a rx7 series 6 with a Sr20det. It was not much of a mazda, just a roll cage with a shell over it. They changed to a sr20 because its a track car and they needed loads of tourque for low speed cornering. So they went the sr20 to keep the weight down.

Link to comment
https://www.sau.com.au/forums/topic/65221-rx7-with-2jzegt/#findComment-1220098
Share on other sites

I have a really old zoom mag. Where they fitted a rx7 series 6 with a Sr20det. It was not much of a mazda, just a roll cage with a shell over it. They changed to a sr20 because its a track car and they needed loads of tourque for low speed cornering. So they went the sr20 to keep the weight down.

weight wasn't the reason for the change to the SR20, it was the fact that the Rotor had to run against the V8's in the 5.0 litre class with it, had to do with the cubic capacity calculations on the rotor....

Link to comment
https://www.sau.com.au/forums/topic/65221-rx7-with-2jzegt/#findComment-1220139
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not very Toyota of the Toyota!
    • Bringing an old thread back to life Looking to put some new front shocks in the r33Gtst and the KYB still look ok for a road car. Unless there are any other options aroind that price $200 a shock?  I’d like to replace the strut tops also, is this the correct KYB no. For the strut top, KSM7124?  https://www.sparesbox.com.au/products/kyb-strut-top-mount-ksm7124?srsltid=AfmBOoq-HDru8wSlLnQrhU9gCw_uYdKg8gUQzONY-EQOdnI5iXOWEUjY 341287 appears to be the front KYB shocks part no.  thanks all   
    • LandCruiser used to get a fluid flush every 12 to 18 months.   Only because it was about that often the electric motor on the master for brake assist kept dieing and needing to come off.
    • Best practice for any track day should be Bleed brake fluid, inspect rotors and pads maybe even flip pads if they are prone to tapering.  Quality pad (project mu, endless, hawk, winmax, ap), Good high carbon content rotor (dba4000/5000, Ap, projectmu), Quality fluid, Good air supply over the rotor and caliper are all required for best performance at a track day no matter the car.  Even the bedding in of the pad and rotor is key to longevity. I've seen so many rotors destroyed on their first track day due to it. 
×
×
  • Create New...