Jump to content
SAU Community

You wont belive this omg omg omg please help


Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Looks like u will have to try and get a few quotes to repair, goto jap wreckers and see if u can get a new bonnet, head lights (i think its a fair bit for just these), front bar etc. But get the quote's first as they will tell u what needs replacing and it will make it a lot easier for when u go shopping.

If not i want the windscreen!

Link to comment
Share on other sites

My estimate

1-strip front $400-800 depends if motor needs to come out

2- repair dampage to radiator support $500-1000 depends if rails are damaged

3-paint $1000-1400

4- refit $500-1000 depends if you need to refit motor

Parts $1800-2500 for a fully dressed front cut.

This way you get everthing to repair it, then sell whats left from the front cut.

Aftermarket parts like FMIC will be extra.

total $4200-6700.

if you can do the stripping and the refitting (the fun bits) you could get away from for about $900-1800 less.

I have repair 5 or 6 cars before like this with more damage, and has never cost me more than $4000 doing some of the work myself.

Form what the photo's look like from here (in Brisbane) it should not be a write-off

Link to comment
Share on other sites

Have seen R33 with same damage, except the wheels where not moved, alignment all that were fine. Only thing that was hit on engine was water pump/fan clutch.

Repair cost over $13K through insurance. If you paid out of your own pocket, $10K.

You only paid $16K, so cut your losses, sell off parts of the car, and buy another. It will be cheaper and better than getting it fixed.

Link to comment
Share on other sites

Dude, if the wheels have shifted, it needs some work :)

I've seen a 32 with this type of damage, and the bill was around the 5-6 grand mark doing the stripping and stuff himself. That said, it NEVER looked or felt right again. From what he told me, the wheels being pushed was the biggest issue, it bent brackets and even a smal part of the chassis. Anyone else suspect chassis issues here.

If you've bent that, sell out.

I reckon a good front cut will cover it.. If you can line the wheels up ever again :P

And yeah, tons of lines have had big damage, but unless they are fixed VERY well, you can always tell in the driving....

Link to comment
Share on other sites

i dont think you got a good deal at all, i got my 1994 R33 auto for $14k

plus mine had full 400r kit, gtr wing, avc-r, 17" rims, leather interior and a few other stuff like mods and stuff

u got ripped off....shouldve researched the market more, especially ur car only being auto

good luck with ur situation, things will work out

Link to comment
Share on other sites

Shit man thats a bit of damage. About 1 month ago i had a red vl commodore full walky kit really wannabe bastard trying to get me to race him and ended up smashing into the back of my R32, its all covered with insurance but i got quoted $3000 to replace rear bar , tail lights, re align boot, resray etc, and in my pictures you'll see, but mate i think thats gonna cost shit loads. See a smash repair to get your estimate price, there pretty good with that. :flamed:

Link to comment
Share on other sites

I might have missed something...

If the car didn't have rego, why was it being driven ???

No rego = No Insurance = your at fault and liable for all costs to all parties involved...

I'm guessing if the police were involved you also got stung with a few fines?

You might be better off cutting your losses and seeling it off as parts....

Link to comment
Share on other sites

Its not a 10k fix at all:

- $1800 for a full R33 S1 Nosecut (Radiator support, radiator, condensor, fans, bar, reo, ind/foglights, headlight, bonnet latch and upright)

- $350 for R33 S1 Bonnet

- $295 for R33 Guard

- $500 to $1000 for suspension items

- $2500 for panel beating and painting

As stated by some others, you could in theory get change from $7000 if you do it all right

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • omfg.... That shopping list game. I'd hoped I'd never see it again.
    • There are fixes for this. In industry we use compressed air for everything. It is frequently wet, and many things cannot tolerate it. So there are various forms of driers available that you can install. The simplest option for something like this would be a dessicant drier. Much cheaper to replace some silica gel than actuator cylinders.
    • That's a solid update mate, well done at WA FOS. You may already know this, but the actuators on the paddle shift are a service item and are sadly not that reliable. As I understand it they collect water from the compressor (condensation) which then rusts the bores/pistons in the actuators. A mate of mine had no end of trouble with them in one if his circuit cars, apparently it's a 'known issue'. Buy a couple of spares at great expense to ensure you never have any problems with the ones you've got! Any clues about what the new WTAC rules might be? While faster cars are cool the Pro class arms race has got to the point where you wouldn't even bother entering without a $1m budget and even then I don't think you'd win.  
    • https://nissan.epc-data.com/skyline/er34/3945-rb25det/trans/317/31940N/ The pictures of the part you're talking about is clearly not just one solenoid. You can see another picture of it here: https://www.alltranz.com.au/shop/drivetrain/automatic-transmission/RE5R01A/product/9305/ The 4 speed automatic in the GTT is Nissan corporate stuff. You can search up similar jobs done on a Frontier or Pathfinder with a RE4R01B to get an idea for what the internals are going to look like and the procedure like this:   
    • Hi Chris,   long time since your post, just wondering if you have the Pinout for the v35 stereo plugs, I bought the roem nis2 harness but it doesn’t match the v35 connector. any help appreciated, I can work out the grn and power constant. But the rest might be hard. thanks Tyson
×
×
  • Create New...