ORC Twin vs Nismo Twin

[voona]

Hi all,

Got a hard choice i have to make soon, anyone know anything about these 2 clutches. What would be the best choice for a street car with some trackwork? Which is easiest to drive? Stronger?

Cheers

[600hp]

mate i had the twin nismo one in before we changed to the tripple plate and it drove like stock!yes we did have a twin plate.

[Downforce]

ORC

[Lunatic Dancer]

Another thumbs up for ORC 709D

just remember that you will need to change your sleeve bearing and carrier if you are going twin..

[voona]

Looks like ORC to me.. Anymore opinions ? What about the noise levels, ive read that the ORC's make some wierd rattles when disengauged ???

Cheers

[voona]

Another thumbs up for ORC 709D

just remember that you will need to change your sleeve bearing and carrier if you are going twin..

Are these Nissan parts or do they come with the clutch kit? Part Numbers ?

Cheers

[Lunatic Dancer]

well...either one hooks up like nothing....

just awesome grip.....

orc does make a rattling sound when clutched in...since two plates

they will rattle around when the pressure plate is off them...

I reckon it sounds tough ahah

There are some brands that has lil springs between the plates to stock this sound...

forgot which one...mayb cusco or OS...

Im pretty sure orc does make a kit but their manual has nissan part no.'s and also

has recommendations on which to use....

To make the most of multiplate clutches at least change the clutch line to a stainless

braided one.....and even better change the slave cylinder too...

apparently I've heard that the nismo slave is identical to the Z32 standard one...

[Lunatic Dancer]

Forgot...you 100% MUST change the pivot ball nut to a forged one ie.nismo etc...

because of the extra clamping force... not worth pulling everything off because

of a small nut inside snapped...

[voona]

You seem to be in the know, can you post a list of what i need to put this beast in? Im thinking i might get the Nismo now, save alot of hastles

[R32-GTS]

Nismo twins are awesome. Drive almost factory and dont rattle. can also buy replacement discs from exedy if needed.

[3R1K]

ORC 709D I'm using it nice

[SteveL]

can also buy replacement discs from exedy if needed.

Can you give me any contact details ??...I have a NISMO G-Max twin plate that needs a couple of plates.

[R32-GTS]

Yeh no worries. Ring Adelaide clutch first. I have a gmax also.

[FATGTS-R]

Interesting to know that not all twin plates rattle, I was always told they did as mine does it as well.

But its so loud that I actually hate it. If I come home late at night the neibours complain more about the clutch rattle than the exhaust note.

[voona]

Really is it that bad. Stuff the ORC then .. I dont like rattles at all ..

[Beer Baron]

I'm yet to hear a twin plate that doesn't rattle. mine does. OS Giken one. that would be nice a twin plate with no rattle. mmmm twin plate.

[R32-GTS]

I think nismo GMAX is the only twin that doesnt rattle but i might be wrong. I actually like the rattle. Swaps ? haha

[voona]

Aparantly the Nismo Gmax doesnt rattle ? As above from R32-GTS. Id much prefur something that doesnt rattle ..

[R32-GTS]

GMAX is really nice to use as well

[teejay]

loved my first nismo twin plate, and im going for one again.

great to use easy to use, and take alot of abuse.