Jump to content
SAU Community

RB25DET gasket kit???

Astonish

By Astonish,
in General Maintenance

 Share

Recommended Posts

The Dan Grand Master

The Dan

Posted
Posted

Retail for the RB20 engine is around $600. This is a monotorque set with imported gaskets and seals from Japan. Most likely some genuine parts in there.

Ring someone like Autobarn or Repco. They will be able to get you a price.

The RB25 should be around the same. I can probably get one for $400 for you if you ask nice. Of course you would have to pay for postage.

SteveL Mentor

SteveL

Posted
Posted

I have a genuine Nissan RB25DET VRS kit you can have for $250 (brand new).

The only extra bits you get with the full gasket set are:

- front crank seal (about $16 for genuine)

- rear seal ($50)

- oil pick-up o-ring (??)

- oil pump gasket (??)

[don't think I've missed anything ??]

I don't believe you get any turbo gaskets with a 'full' set (except for the ex manifold gasket), and there is no sump gasket (just use 3-bond).

Astonish Rising Star

Astonish

Posted
  • Author
Posted

my car just came from japan and i noticed an oil leak from the rocker cover...so i thought i just get the engine all checked and do a MAJOR MAJOR service including changing every oil that can ever be changed on it. It's a pitty that the car is gone for compliance and its been 2 weeks already and still canberra is to send the plates down, the guys think it'll take another couple weeks. : ( Thanks ppl i appreciate your info.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • lilley's gtr
      Rb26/30 build

      By lilley's gtr · Posted

      I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lilley's gtr
      Rb26/30 build advice on pros and cons

      By lilley's gtr · Posted

      I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • Sleepergm
      Nismo rear spats

      By Sleepergm · Posted

      lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • MBS206
      Nismo rear spats

      By MBS206 · Posted

      That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • RA708
      G'day!

      By RA708 · Posted

      Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...