Jump to content
SAU Community

Recommended Posts

my power fc is locked/password protected whatever, would a tuner be able to unlock it does anyone know?

You need a Datalogit to unlock it. Yes a tuner might be able to unlock it if they've got the smarts.

never seen a 'kit' before mate , most people use stereo (0 or 4 guage) cable (there is probably better cable you can use? ) , and run it from wherever the + battery terminal under the bonnet leads to, then earth to the body somewhere in the boot then buy a marine battery box and house the battery in that :) (just remember the battery has to vent outside the car to be road legal)

Edited by toffy

Thanks guys.

Haha I'm the sort of person that whenever I play electician, I leave the shed with tingles lol. I can do a little bit. Once I find where the +battery terminal leads to and mounts, I can run the cable and hook it up into the battery leads ok. How do you go about securing it in the boot so it doesn't roll around? Otherwise it not bolted down but it secure positioned in the footwell behind my drivers seat :laugh:

Most of the stuff you need you should be able to find at a campervan/trailer place or auto electrician joint will sell the parts.

You'll need the biggest cable you can afford (up to 0 gauge) 4ga as a minimum. Don't use car audio cable, use something with thicker strands in the windings.

6-7m of + cable

2m of - cable (must be the same size cable or bigger)

Insulated mountable terminal post

Crimp on ring terminals (once the cable is cut to length, get somone to crinp them on the cable for you)

Heatshrink (thick stuff with glue inside)

Battery terminals

Battery tray

Battery tie down

Battery box

Make shure you sand back to bare metal any earth points on the chassis. Any terminals on the cables have to be crimped on correctly. Try and consolidate the + feeds onto the + post in the engine bay.

Have fun

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 1. There are no real performance benefits. It sounds different, and as the pipes are not as large diameter you can claw back some undercar clearance or run lower (if that's your thing). 2. Twin pipes, offering exactly the same cross sectional area as a single pipe** will have higher pressure drop - so will not flow as well. That's because there is more surface area of wall per cross sectional pipe area, hence more frictional losses. ** But of course, it is almost impossible to get 2 pipes that are exactly the same XS area as a given typical single pipe. eg, 2x2" is not the same as 1x 3", although it is close. If the 2x pipes add up to less XS area than the single - it will just be flat out worse. If the 2x pipes add up to a bit more than the single, then it might come out as a wash. If the 2x pipes are substantially more XS area than the single, then it will probably flow a little better. 3. No. Why would there be? What have cats got to do with boost creep?*** ***But for f**ks' sake, please run a cat. 4. If you want.
    • UPDATE: was able to have the bracket repaired and base repaired, seat is like new now ;)
    • I was going to say it looks right out of Gran Turismo photoshoot when you just buy the car. (in a good way)
    • Legend mate, cheers for the response. I just got the block back from the machine shop and didn't wanna go drilling after I clean it.
×
×
  • Create New...