Jump to content
SAU Community

Getting stupid MoFoS to pay their Insurance Claims


Recommended Posts

Guest | hype^ |

that bogan f4g that hit me 2 f**king months ago still refuses to pay his excess!!!!

and the insurance company wont fix my car till he pays it even though hes put his claim through!!!

FFS what sh1t is that!!!

So im left with a fvct car till (if even) he decieds to get off his a55 and pay up!!

Im not insured under my line only my dad is, and its with justcars, same as the guy who hit me..

and they refuse to do jack till he pays his excess!!!!

shouldnt that be something they have to chase up themselves and not stuff me around!! :D:):D

im sure u should be able to make a court case outa it

if theres a police report u definately have a case

he would have to pay his excesses and ur court costs i would imagine.... for not paying his excess to get the cars fixed

im not sure if this is correct as im not a lawyer... but it is an idea i guess

good luck dude

Originally posted by | hype^ |

that bogan f4g that hit me  2 f**king months ago still refuses to pay his excess!!!!  

and the insurance company wont fix my car till he pays it even though hes put his claim through!!!  

FFS what sh1t is that!!!

So im left with a fvct car till (if even) he decieds to get off his a55 and pay up!!

Im not insured under my line only my dad is, and its with justcars, same as the guy who hit me..

and they refuse to do jack till he pays his excess!!!!  

shouldnt that be something they have to chase up themselves and not stuff me around!! :D:):D

Eugene if you have the claim number surely you can start on your car?

u should be getting paid, even if he hasnt paid his excess

that is the insurance companies problem, not yours

all insurance companies re-nsure with each other so they will be fine, they make a killing anyways

i would take it to court if they fail to pay on next request

Originally posted by RAIDER

that is the insurance companies problem, not yours

I'm with RAIDER here......

They have to pay your claim if it's been approved. Whether or not the other dude has paid his excess is completely irrelevant. Just Cars are just trying to f*ck you around like any other insurance company.......

by the way hype you have read your insurance conditions? just cars does their insurance by the youngest driver and ONLY by the drivers on the policy.

if you hit the car and its your fault, you're up shit creek. you cant just pay an undeclared drivers excess and get them to pay, you'll have to pay out of your own pocket or really dodge it and say your old man smashed it.

being shifty with insurance is not a smart thing to do dude.

Originally posted by | hype^ |

Im not insured under my line only my dad is

Not really directed just at you hype, but I think we all need ot much more aware that this is a public forum.. If I worked for Just Cars, I'd be keeping an eye on skyline, wrx, silvia, hsv etc forums.

Same if I was a highway patrol cop looking for cruises to target

Dluded: the thing is just cars does not accept that option, you MUST be written on the policy to be covered. Theres no undeclared driver option on the policy, so hes pretty much not covered, waste of money on a premium.

My car is insured under my dad's name and i am not listed at all but there is a clause saying that if someone unlisted crashes the car its cover but there is an extra excess and if that person is under 25 there is another excess on top :D

You just need to check the fine print :D

threaten just cars with legal action, because you have a policy and your premiums are up to date. threaten if they do not comply with issuing cover you will seek legal advice for

a) loss of income from work dependent vehicle (heh...)

B) FAILING TO FULFILL TERMS OF THE CONTRACT!

kick their ass

Originally posted by kabab

My car is insured under my dad's name and i am not listed at all but there is a clause saying that if someone unlisted crashes the car its cover but there is an extra excess and if that person is under 25 there is another excess on top :D

You just need to check the fine print :D

read the large print lol- no name on policy = no cover

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know this one’s the BB one. My tuner did make mention about the actuator. I am curious about the VCT as well
    • Might also needs a stronger actuator with the right preloading. With older 2019 built bush G3 units, BB upgrade or 21U housing down size makes a pretty decent gain in response as well. 
    • Hey lads  so im finally putting together my rb30 forged bottom end and ran into an issue. I measured my main bearing clearance with arp main studs torqued to 60 ft-lbs using ACL H series STD size bearings and standard, un-ground crank shaft journals and got an oil clearance reading of about 1.3 thou measuring straight up and down and about 2.8 thou measuring at a 45 degree angle (just above and below the parting line). My machine shop said they measured the main tunnel and it was all within spec (they didnt say the actual measurement) and to go with a standard size bearing, which i have done and the clearance is too tight, I'm guessing because of the extra clamping force from the arp studs distorting the main tunnel. I was wanting to run about 2.5 thou main bearing clearance.  My questions are: 1. could i just use the HX extra 1 thou clearance ACL bearings? that would fix my straight up and down clearance making it about 2.3 thou, but then would the side to side clearance be too big at around 3.8 thou? 2. what actually is the recommended main bearing clearance for measuring near the parting line / side to side. i know its supposed to be bigger as the bearing has some eccentricity built into it but how much more clearance should there be compared to the straight up and down measurement? at the moment there is about 1.5thou difference, is that acceptable or should it be less? 3. If i took the engine block + girdle back to the machine shop and got them to line bore the main tunnel (like i told them to do the first time, but they said it didnt need it) what bearing size would i buy? the STD size bearing shells already slide in fairly easily with no real resistance, some even falling out if i tip the girdle up-side-down. If im taking material out of the main tunnel would i need a bearing with extra material on the back side to make up for it? this is probably confusing af to read so if something doesn't make sense let me know and ill try explaining in a different way. My machine shop doesn't come back from christmas break until mid January, hence why i'm asking these questions here. TIA for any help or info 
    • I bought the model back in Japan in Feb. I realised I could never build it, looked around for people who could build it, turns out there's some very skilled people out there that will make copies of 1:1 cars or near enough. I'm not really a photo guy... but people were dragging me in a group chat for the choice of bumper as someone else saw the car before it was finished as they are also a customer of that shop. I took the photo in the above post because I was pretty confident that the lip would work wonders for it. Here's some more in-progress and almost-done pics. It gives a good enough idea as to what the rear looks like!   I have also booked in a track day at the end of January. Lets all hope that is nothing but pure fun and games. If it's not pure fun and games, well, I've already got half an engine spare in the cupboard 
    • Well, do ya, punk? Seriously though, let's fu<king go! The colour and kit looks amazing on the car. Do you have any shots from the rear? I don't quite follow how the model came around. You bought the white kit and he modified it to match your car? Looks nuts either way!
×
×
  • Create New...