Jump to content
SAU Community

Water in rear spoiler 32 GTR


reni
 Share

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

haha, it may be too. Though i've had it off the boot and there was noise sound of water splashing around in there. The stock GTR wings are fairly hefty too. regardless of their water content!! :D

Link to comment
Share on other sites

Ronin 09 Posted Today, 03:36 PM

  I will throw a spanner in the compliance / boat water theory.

Mine's an Aus delivered and it has water in the boot spoiler too... go figure.

i'd say it still came on a boat from japan and would have been sprayed at customs for bugs/diseases etc etc

i cant imagine any other way!

theres way to much water for it to come from condensation!

Link to comment
Share on other sites

i'd say it still came on a boat from japan and would have been sprayed at customs for bugs/diseases etc etc

i cant imagine any other way!

theres way to much water for it to come from condensation!

I've emptied mine post it landing, and its filling up again... so there is nothing special about the trip from Japan. I imagine its got something to do with the bonded nature of the spoiler and rain + washing.

Link to comment
Share on other sites

This has been an interesting thread, the first time in SAU's history I have head of it and all of a sudden heaps of people mention the problem!

reni, how about editing the title so the thread says what it is actually about, and people can find it when browsing and searching :P

Link to comment
Share on other sites

I just got my r32 GTR friday arvo from the docks in freo.. I had water in my tail lights on the right side (turns out a bit of rust perhaps where it wasn't painted up right or something, and the sticky black stuff wasn't all the way around).. Gonna put some anti-rust stuff on it tomorrow after a good going over with a wire brush in a drill, and my wing has a bit of water in it too...

Thanks for the tips... I'll pull it off and empty the water tomorrow as well.

Cheers,

-Shaun

Link to comment
Share on other sites

Remember the at the blade on an R32GTR rear wing is a two piece moulding so there may be some way (?) water gets in there...

My wing on my 32 GTR has water sloshing around inside it also. I've also noticed at the rear eddge of the wing, there is a longish hairline fracture formed. Perhaps capilary action has caused any water dripping down on the surface to be sucked in. I don't think this alone could cause huge ammounts of pressure to build up though. You never know :D

Cheers,

-Shaun

Link to comment
Share on other sites

I have seen this thread some weeks back and being a recent GTR buyer I decided to check it out. I opened the boot a few times and then I shook it around ... nothing. Having breathed a sigh of relief I left the poor thing alone and stopped messing with its back side.

Two days later however I opened the boot again and lo and behold Niagara falls inside my wing, bloody wombat tails says I. What a silly problem to have. Almost as common as the door foam on Nissans scratching the driver side window. So please +1 GTR to the water in the spoiler count.

In fact we should probably get a counter going, admin ... :D

Link to comment
Share on other sites

What a silly problem to have. Almost as common as the door foam on Nissans scratching the driver side window.

this has happened to my window is ther any way to "clean" the scratchs of/out?

if you have taken the water out what was the water like? dirty? fresh?

Link to comment
Share on other sites

if you have taken the water out what was the water like? dirty? fresh?

I didn't stop to take a sip so I can't comment on its freshness (maybe we could sell "GT-R Water" on ebay? Good for atleast 30rwkw), but it looked reasonably clear.

As for the window problem, there is a thread on that somewhere else.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Thanks to @V35_Paul there is an oem stereo available on gumtree, but the fascia is slightly different. It has a flip up screen as opposed to my pop up screen. Am I able to disconnect the radio/cd player from the fascia to use it on mine?    
    • Had to google what a quart is lol.. so rough as guts a litre. That's a bit excessive, also what oil weight are you running? The whole steam cleaning idea isn't too far fetched either. Maybe as you suggested, turn off the WMI (assuming your Kebabtech pulls timing, boost, etc.) and run it for a bit and see if there are any noticeable changes in spark plug colouring.
    • Pretty simple question. I was about to put the transmission back in and thought I pretty much had it lined up when I noticed it seems like the pressure plate isn't flat. I was pretty careful when undoing the bolts both during initial disassembly for cleaning and when torquing them up for installation so this is pretty discouraging. I'm not sure if I accidentally bumped the pressure plate with the input shaft and bent it somehow or if it just showed up this way. Is it possible that there's just something obvious I'm not doing correctly? I'm pretty sure I was extremely careful to make sure the friction discs were seated correctly in the hub, everything lined up, flywheel torqued according to sequence, the little springs all sitting correctly in their seats, etc.  What's the play here? Do I jump straight to a new pressure plate?
    • OK. I can see that being the case. But if you live in the land of "only switching between 4.08, 4.11, 4.36" like most Skyliners, then you never encounter it. Now I perhaps understand why the crownwheel is thicker on some of the smaller numerical ratio diffs. The two stubs being the same (unequal) lengths and just swapped side to side between the different cases is a new one to me. I'm hating Nissan R200s more than ever now.
    • Reason I say this is I have seen broken ones, in drift, drag and even behind a stock Z. I do appreciate most of the time its the synchro's that go.   Trouble with quoting HP is it doesn't really say how strong the box is.  I've not seen many CD00X box's make it past a mid 9(150mph) I have seen about a stock R33 RB25 box's run a 9 too, they all go boom at some point though.   Another clue is they make gearsets for CD00X box's too, wouldn't be a market if they didn't break or have a limit people are going past.   I totally agree it is a strong box, just have to weigh up the true total cost of the conversion vs rebuilding with a good gearset. 
×
×
  • Create New...