GOT BOOST Posted November 26, 2002 Share Posted November 26, 2002 had the car up to formaz again for power run after cooler and few turbo mods made 211bhp at 13psi the lil rb20 is gettin there Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/ Share on other sites More sharing options...
ix9 Posted November 26, 2002 Share Posted November 26, 2002 not too shabby dude... ... you're always doing something to your car eh ? if it's not a new coola, it's more boost. more dyno... more drags...talk about keen Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-98035 Share on other sites More sharing options...
skyzerr33 Posted November 26, 2002 Share Posted November 26, 2002 congrats dude awesome stuff is the new dump pipe in yet? Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-98047 Share on other sites More sharing options...
GOT BOOST Posted November 26, 2002 Author Share Posted November 26, 2002 no dump pipe as yet. had one made but sample i was given wasnt to suit line. DOH thinkin bout turbo upgrade next. mick at formaz also suggested AFC controller to lean up bottom yet showed on power run its too fat dowm low Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-98053 Share on other sites More sharing options...
Hicks Posted November 27, 2002 Share Posted November 27, 2002 Dynos are all messed up. I pulled 240bhp at formaz and 270bhp at genie. But i think formaz is the good one. But that doesn't stop me from showin other people the 270 one. Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-98961 Share on other sites More sharing options...
skyzerr33 Posted November 27, 2002 Share Posted November 27, 2002 genie is a different sort of dyno to formaz readings are taken differently. Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99002 Share on other sites More sharing options...
JH32 Posted November 27, 2002 Share Posted November 27, 2002 How much does a power run cost at Formaz? And what sort of things can be done while you're on the dyno doing a power run? Or is that all it is? Cheers Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99065 Share on other sites More sharing options...
Hicks Posted November 27, 2002 Share Posted November 27, 2002 They cost 50 bucks, should get 2 runs. It shows boost pressure, air fuel ratios obviously HP and a few other things. Its a pretty awsome dyno, only a few months old. Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99082 Share on other sites More sharing options...
JH32 Posted November 27, 2002 Share Posted November 27, 2002 Kool Do they fiddle with the timing or does that cost extra? Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99083 Share on other sites More sharing options...
Hicks Posted November 27, 2002 Share Posted November 27, 2002 They can do if you ask them, one of the blokes there is ****in good. But it'll cost extra. Not sure how much. Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99158 Share on other sites More sharing options...
rev210 Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by Hicks Dynos are all messed up. I pulled 240bhp at formaz and 270bhp at genie. But i think formaz is the good one. But that doesn't stop me from showin other people the 270 one. The genie one is a good 'car seller' I ran a guy who just had a fresh 305rwhp chart from the genie dyno and handed him his ass several times at no stage did he ever look like keeping up. In the real world i don't think I've got any more than 200rwhp ( I've not had a dyno for a long time all the same). Formaz sounds good for just $50 a run. Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99215 Share on other sites More sharing options...
JH32 Posted November 28, 2002 Share Posted November 28, 2002 Yeah sweet I think I might get a power run done there then Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99222 Share on other sites More sharing options...
macka Posted November 28, 2002 Share Posted November 28, 2002 Ive heard the Formaz one is a "hard" dyno so should be interesting... Im booked in at cyphers tomorrow for an AFC tune so they use the formaz one shall be interesting what i may get i think boost will only be limited to Injector duty cycle now Fingers crossed it dont blow hehe Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99381 Share on other sites More sharing options...
rev210 Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by macka Ive heard the Formaz one is a "hard" dyno so should be interesting... Im booked in at cyphers tomorrow for an AFC tune so they use the formaz one shall be interesting what i may get i think boost will only be limited to Injector duty cycle now Fingers crossed it dont blow hehe Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change. As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure). Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99661 Share on other sites More sharing options...
macka Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by rev210 Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change. As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure). A wet paper bag is harder than Genies and Myarees dyno Maybe a bit harsher than Psis and Barrys altho just a guess United fuel injection damn u gotta have a good car to get any sort of figures on that bloody thing hehe Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom then ill be back to the drags chasing gradenkos tail hehe...oh and yours! Looks like the pineapples will go in aftrwards too Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99690 Share on other sites More sharing options...
rev210 Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by macka A wet paper bag is harder than Genies and Myarees dyno Maybe a bit harsher than Psis and Barrys altho just a guess United fuel injection damn u gotta have a good car to get any sort of figures on that bloody thing hehe Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom then ill be back to the drags chasing gradenkos tail hehe...oh and yours! Looks like the pineapples will go in aftrwards too Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car. I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D 910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet) What fuel management are you running macka? Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99707 Share on other sites More sharing options...
macka Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by rev210 Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car. I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D 910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet) What fuel management are you running macka? Cant be too optimistic I got [email protected] psi at psis not long ago so i should easy get 300 but ya never know,.. Im running a top secret ROM which seems to only control ignition and im getting the Safc tuned tomorrow at 16psi dont worry i have a decompressed engine Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99736 Share on other sites More sharing options...
Gradenko Posted November 28, 2002 Share Posted November 28, 2002 Originally posted by macka then ill be back to the drags chasing gradenkos tail hehe...oh and yours! Or more than likley, you'll be showing us your tail. In any case, your outta range for the stock turbo award Speaking of fuel pumps, Barrie showed me a Walbro in tank pump yesterday, a bit of a change from Bosch I thought. Seems like a good deal though, flows 195ltr/hr, enough for 500hp for $220 and a higher model available that flows 255 ltr/hr and can handle high pressure. http://www.autoperformanceengineering.com/...l/fuelpump.html Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99742 Share on other sites More sharing options...
Hicks Posted November 28, 2002 Share Posted November 28, 2002 Gradenko, whats 5 puck?? What dyno did you pull 280rwhp on?? Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99752 Share on other sites More sharing options...
JH32 Posted November 28, 2002 Share Posted November 28, 2002 Hicks, 5 puck is a heavy duty clutch Link to comment https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99766 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now