Jump to content
SAU Community

Recommended Posts

In the market for a fuel pump now, and having looked around the site most people seem to upgrade to a 040 or a 044. Whats the advantage of these over the Walbro 255? the 255 is cheaper, and flows more than the 040.

When i upgrade my fuel pump in my r33, is there anything else i need to get ie. regulator?

Link to comment
https://www.sau.com.au/forums/topic/65874-fuel-pumps/
Share on other sites

In the market for a fuel pump now, and having looked around the site most people seem to upgrade to a 040 or a 044. Whats the advantage of these over the Walbro 255? the 255 is cheaper, and flows more than the 040.

When i upgrade my fuel pump in my r33, is there anything else i need to get ie. regulator?

Try doing a search on Walbro, you will be amazed what you find when you do a search. If you had done a search before posting this often asked question, you would have found lots of great info that would provide an answer. The search button is your friend, use it often.:(

PS; Did I mention that you should do a search?

Link to comment
https://www.sau.com.au/forums/topic/65874-fuel-pumps/#findComment-1230222
Share on other sites

:D at SK, you typed out enough about the seach button to tell him whats, what...

Anyway,

The walbro pumps are good but you pay for what you get, they are only able to get around 265rwkw's on a R33 so i'd use one of this for a serge tank set-up.

The 044 as ben said is rated at around 700hp, I wouldn't recomend inless you are after around 500hp at the wheels. Depends on what horsepower you'r after, 250rwkw's = walbro anthing over that go the 040.

:(

Jun

P.S did i mention to use the seach funtion he he :flame: :(

Link to comment
https://www.sau.com.au/forums/topic/65874-fuel-pumps/#findComment-1230473
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That’s a beautiful setup Tao, Have u done any development with the new Turbosmart 40mm electronic straight gate, especially in this G30 configuration?
    • Let's hope that's not a copy pump either. There were so many copies of them back in the day.
    • Damn it, I was at work last night, and stayed in a room there during the storm with the car outside, but undercover, I just went downstairs and well....there was a large steel locker that has come from some place last night, it wasn't anywhere I could see yesterday, and yeap, it landed on the fraking car....of course it did..... LOL So, I'll need to take it back for paint and panel, luckily it was only the boot that took the hit, so it could have been worse Serves me right for staying at work and getting on the cans with some of the boys
    • Yeah, really happy with how it all turned out As for aftermarket lip, nah, I'm not really a fan for practically reasons on a street car that gets driven everywhere  I did have the full lower kit on my 2015 STI, but found the front lip scrapped alot, even at stock 4x4ish ride height As the NC sits now, with the lowest point of the car at 110mm, so just legal, some steep driveways and steep speed humps will still "just" scrap those little plastic OEM air dam thingies on the undertray just before the front wheels
    • Here's one I help build and tuned a decade ago, Garrett  GTX3071R Gen 1, T3 twin scroll 0.83 rear housing. Went from larger 272 cams down to smaller Tomei Poncams to help with the low end. S13 non VCT motor. Car was purpose built for the track, hence low down was the focus. Note the actual dyno chart shows lower boost, however the EBC and boost gauge showed 1.9Bar (Ignore the torque, I was young and didn't know how to set derived torque)  
×
×
  • Create New...