GReddy Plenum and Fuel Rail (RB25) Injector question?

[PHaT MR30]

I purchased one of these through Nengun and it arrived last week. On inspection it appears that the fuel rail is a top feed unit, but it is the right one.

I was going to upgrade my injectors anyway, but im lucky i didn't go out and get some side feeds.

so i am curious... what top feed injectors would i use?? just something to suit RB26???

[cameron]

RB25 = Side Feed High Impedance

RB26 = Top Feed Low Impedance

So basically you got this RB25 fuel rail and it appears to be one for RB25 Greddy Plenum but top feed ? You can run top feed injectors in you'r RB25.

What injectors to use for RB26 ? Basically anything you can afford, they don't have to be Japanese brand's you can get denso, jecs etc... size of the injectors depends on what horsepower you are after.

Jun

[PHaT MR30]

I can tell you this from my very basic knowledge

it has 10.5mm holes in the rail and does not look to be hose feed or anything.

the plenum fits 'normal' injectors as the std fit in with the o ring collar thingys off the std manifold/plenum i am told.