Jump to content
SAU Community

Custom 180sx sr20det show/drift


Recommended Posts

F/s 1992 180sx

Sr20det model

5 speed manual

new heavy duty clutch

re-painted in tiger mica gold

veilside front bar and side skirts

5zigen rear bar

recaro front seat with nismo embroyded all over it

kenwood double din cd unit

alpine speakers

nardi steering wheel

1.5 way mechanical lsd (cusco we think)

3 inch stainless exhust from the turbo back

motor tuned in the tomie factory japan parts include

tomie cams

tomie cam gears

tomie custom turbo

tomie drift and drag computer (stand alone not plug in)

fuel pump modulate

and other tomie internals

duel fuel pumps

hks suspension

blitz pod

blitz bov

think thats it... it's goin for 17500 with balance of rego. contact my brother marty on 0423349235 for details or to discuss anything more, i have only a limited knowlege of the car and he's a mechanic to so best to dirrect questions there

Link to comment
Share on other sites

it's never had a serious power run done but he ran it at his tafe dyno and just as it past 300hp the rollers broke and it still had some more in it so a mimum of 300hp

pics i'll work on

parts are all there

as for your tech side of things mate just just give me ya number and my bro will ring u, he can answer them

Link to comment
Share on other sites

  • 2 weeks later...

Who's going to come and drive to your place to look at a car when they have absolutely no idea what it looks like? :slap: Do people REALLY think that they can sell cars on the internet without providing good photos of the car that they're selling??? :confused:

Oh, and I bought my last car from Adelaide. I flew down for the day to check it out and bought it. So don't discount interstate buyers. Why the hell would you artificially limit your market? :idea:

Link to comment
Share on other sites

  • 1 month later...
Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
×
×
  • Create New...