Jump to content
SAU Community

R32

babyskyline
 Share

Recommended Posts

babyskyline Grand Master

babyskyline

Posted
Posted

hey guys for sale is my R32 1989 model 4 door.

only has 91000 on the clock

it has been a reliable car for the past 6 months but now its time to upgrade.

it is in pretty good condition for its age with a few small stone chips here and there as well as a couple of new dents to the front right fender (nothing major just got hit by a trolley while i was at work some time lat week, left little scratches)

ok the mods. it is pretty much a stock car with only an upgrade in exhaust to 2 1/4 inch size and 5 inch bodied 4 inch tip drift cannon style muffler.

it is a 5 speed Manual with the usuall power options (Power Steering, power windows, power mirrors) has central locking, Climate Control AC (was re-gassed 10 months ago) LSD and extractors

the interior is very clean except for a broken passenger air vent (they only cost about $50) and there is a Sony Xplod MP3 CD player (CDX-R3300S)]

has 6 months QLD rego and RWC so no hassels for new owner finding out it cant be registered.

its N/A so there is no hassels with insurance.

Very clean Well maintained car

first owner in australia Genuine reason for sale, need to sell soon

so any offers around 8000 ono will be accepted.

[/b]PRICE DROP NOW ONLY 6500[/b]

pm me or you can contact me on 0439794895

Link to comment
https://www.sau.com.au/forums/topic/66286-r32/
Share on other sites
TTT Grand Master

TTT

Posted
Posted

why don't you just tell everyone that it is NA to stop them asking over and over.

and you should change the original post where you say

split pump/front pipes

because this car is not turbo and therefore doesn't have a DUMP pipe, so I can only assume that you are refering to a set of extractors.

Link to comment
https://www.sau.com.au/forums/topic/66286-r32/#findComment-1244310
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Universal socket tool

      By r32-25t · Posted

      Donut tried them out, they were fine as long as the bolt or nut wasn’t very tight 
    • joshuaho96
      R33 Fuel Tank crack

      By joshuaho96 · Posted

      It is a very complicated plastic tank. Sitting between the rear seats and the rear subframe. Requires a siphon venturi pump in the hat to suck the fuel from the passenger side to the driver side of the tank. The answer is probably prepping the tank very carefully to eliminate all fuel fumes, drilling any cracks to stop propagation, then plastic weld. I don't really see any other solution here. 
    • silviaz
      Oil Analysis Victoria - What Are Your Experiences?

      By silviaz · Posted

      Does anyone know when your oil drops viscosity, if it is an issue? I imagine with tuned cars they will be overfueling more compared to a stock standard car and will thin out over time. 
    • hardsteppa
      Universal socket tool

      By hardsteppa · Posted

      anyone ever used these ? https://www.ebay.com.au/itm/186214260439?_skw=socket+set&itmmeta=01JEG3TKV388ZXGP8N7CHNCQ45&hash=item2b5b3c1ed7:g:mhAAAOSwwB9lf~Xm&itmprp=enc%3AAQAJAAAAwHoV3kP08IDx%2BKZ9MfhVJKkJwJeiNMm%2FsStacz%2BhjzBowaFnbNCowwe08vVGrW0FbesCs%2Flw%2FQYjDQLjKsuKvgysWT9%2F4b9AZUX3qLP5RDfFhtD8DxufvqBbyZrQAQXuG3h8%2BxxqhWhH8fIfU84eA9W7VIpxDNw9MWj9BdfkkMasYhcqOjTrcKwLyD3ftzZbaZb2Us7%2FFR1Q2kcT68ZYRU77%2F%2BtRr1qBS27BXxh%2FjWBQxhWyUcLlEFIb%2BITZPIKwxQ%3D%3D|tkp%3ABlBMUOy96oP0ZA   I believe the idea being, the rods push back around the shape of whatever nut you put in there. Sounds pretty handy to just need to carry 1x socket in the car for 'most sizes'  but, theory vs reality, anyone tried them?
    • GTSBoy
      R33 Fuel Tank crack

      By GTSBoy · Posted

      I'm not that familiar with R33 tanks. Plastic? Up behind the rear seat between the towers? Or under the boot floor like a normal car? It's the battery that's up between the towers isn't it? So, plastic tanks. Well, um. The obvious reco is plastic welding, which you'd only look at asking someone who's really good at to contemplate trying. The fuel contamination and grot is probably going to make it quite difficult though. Whether plastic or steel - the end of the crack will want to be drilled before any welding or sealing is done. Otherwise it will just continue to wander along until something bad happens. Steel tank? The obvious answer is drain, wash, purge with inert gas and drill the crack end and weld/braze/silver solder/whatever the guys who do that to fuel tanks recommend. I had a crack/hole/leak in the bottom of a Commodore tank (oe was it my ALFA? - can't remember) that I slammed some gorilla snot onto and it never leaked again. It worked surprisingly well. Or, it's time to fab a new tank.
×
×
  • Create New...