Jump to content
SAU Community

Recommended Posts

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

not this one :)

Yeah, I was watching most of the afternoon nursing a massive hangover in the shade (under the big grand stand) and your car looked like it was only puting out 50% if that. Any problems on the day?

Troy, did you have a skid mark at the end of the front straight? I saw you brake a lil late on one lap and left a puff of smoke, was it a close call?

Not so good watching as driving, really started getting depressed half way through the day thinking about my baby all sick at home (car that is)

....

Troy, did you have a skid mark at the end of the front straight? I saw you brake a lil late on one lap and left a puff of smoke, was it a close call? ...

 

Oops, thats two people that saw that:) Snowman told me of the first time he went flat down the straight only too find that he was too hot for turn 1...lol, well that makes two of us:)

If i didnt lock up i would have gone close ot hammering thru turn 1, but because i pinched the brake i ran a bit wide onto the grass:( So wast really that big a moment except for the fact that it was my first flying lap and i flat spotted the front left tyre leaving me with a bad front end vibration all day:(

Was the brake lock up that bad/smokey, it didnt feel too bad, but i suppose the physical evidence i left behind tells the whoel truth:)

Its got a horrible vibration now, and its really bad under brakes...lol i drove the rest of the day on it and it was ok, it wasnt down to the canvas or anything:)

Yeah, I was watching most of the afternoon nursing a massive hangover in the shade (under the big grand stand) and your car looked like it was only puting out 50% if that. Any problems on the day?  

...

I had some *ahem* temp issues and brakes going away issues...

In the morning session 4 laps was all it took to get oil to 120 (with a cooler) and water to 110...

Plus when I was on the front straight in the morning we had a *moment* coming up on that red maserati where he was braking, I was braking... and he was slowing down faster than me... I pushed the pedal harder... and got... nothing. All I saw was dollar signs coming up towards him but he turned in just in time :) I on the other hand had the GTR sideways on the far ripple strip trying to wash of speed like a crazy bastard :P

In the arvo went out for one warm up, 2 flying and one cool down and by the end of the first flying (turn 1) I had no brakes again :rofl:

How did you go with your times marcus?

I think I did something like a 1:38? Funny that last time I went out with less power and farked suspension I did 1:33... :Oops:

As I keep saying, car is capable of sub 1:30, it's the operator who isn't!

Have you upgraded your pads and used racing brake fluid?

Sounds like you have cooked the pads and boiled the oil.

I had some *ahem* temp issues and brakes going away issues...

In the morning session 4 laps was all it took to get oil to 120 (with a cooler) and water to 110...

Plus when I was on the front straight in the morning we had a *moment* coming up on that red maserati where he was braking, I was braking... and he was slowing down faster than me... I pushed the pedal harder... and got... nothing.  All I saw was dollar signs coming up towards him but he turned in just in time :( I on the other hand had the GTR sideways on the far ripple strip trying to wash of speed like a crazy bastard :rofl:

In the arvo went out for one warm up, 2 flying and one cool down and by the end of the first flying (turn 1) I had no brakes again :)

I think I did something like a 1:38? Funny that last time I went out with less power and farked suspension I did 1:33... :Oops:

As I keep saying, car is capable of sub 1:30, it's the operator who isn't!

Did anyone take photos on the day, or have links to a website with photos?

I took a few photos but mainly just of the crashed ferrari.

attachment.php?attachmentid=34797&stc=1

attachment.php?attachmentid=34798&stc=1

attachment.php?attachmentid=34799&stc=1

Mustang sliding around the final corner.

attachment.php?attachmentid=34800&stc=1

Roy's car being towed off the track.

attachment.php?attachmentid=34801&stc=1

attachment.php?attachmentid=34802&stc=1

That's why you should buy Castrol SRF :P

Hey Al, Castrol SRF was in mine on Sunday and still cooked 'em :Oops:

I was running Endless CC-X ceramic carbon pads, and Nismo braided lines with Cusco brake cylinder stopper. Last time out at sandown was running RB74s and cooked them too, with Motul 5.1 fluid.

I believe that I have done as much as possible with the existing brake setup, and that my brake issues stem from the tiny disk so will have to look at alternatives

;)

Why did Troy get towed off?

Yeah, Troy, why did Troy get towed off?? Didn't tell me that part did you?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...