HKS EIDS Pro question

[SAWAKITA]

Hi,

I just recently bought EIDS Pro

it comes with Japanese manual and I have problem with this part

does anyone know how to adjust this or know where I can find English manual?

Thanks for your help

[SAWAKITA]

did i post in wrong thread??

[600hp]

mate give Croydon Racing Development a call as they know how to install these.

[INASNT]

If you bought it to solve an atmo venting bov stalling problem then it wont solve ur problem.

[600hp]

mate Croydon Racing Developments know how to install these! give them a call.

[armbrusb]

Why won't this solve a stalling problem?

[INASNT]

Because it will only solve the stalling problem associated with a larger turbo effecting the afm when you get off the throttle as it alters the afm signal to a constant signal. WOnt solve BOV etc problems

[RB power]

does anyone have the instructions for the h1?

[9krpm]

if you installed it properly it should solves your stalling saga.

[pkblade]

Don't have a copy of the ECR 33 ECU pin layout with me so can't give u the exact terminal numbers.

EIDS Pro - Type H1

BLACK - CU Earth/ Chasis Ground

ORANGE - Throttle Position Sensor signal

RED - 12V/ CU Power

WHITE - AFM (IN)

YELLOW - AFM (OUT)

FYI: By IN & OUT - this means cut the appropriate AFM wire leading into the pin & don't cut too close to the the terminal, give ample space on each end to work with.

The WHITE wire is to be connected to the AFM singal wire that's not leading to the ECU; &

The YELLOW wire connects to the AFM singal wire that's sticking out of the harness.

From what I've read the same colour wiring & pin signals seem to be same for other EIDS types.

[RB power]

hi im running a rb20det and use a Q45 afm which only uses one of the factory afm wires....

so will this work?