Jump to content
SAU Community

Recommended Posts

I just recently got myself an R34 GT-T, in total stock format, and was a little curious how much PSI the stock turbo runs? According to the boost guage in there by standard, it goes upto 1 kg/cm2, which apparantly converts to about 14psi! If this is true, then there's something wrong with my car, because it certainly doesn't feel like that much boost :P So is the stock boost guage hideously wrong? Or am I doing the conversion wrong? Does anyone know the actual stock PSI rating of the turbo? Cheers :)

Link to comment
https://www.sau.com.au/forums/topic/66528-r34-gt-t-stock-turbo/
Share on other sites

an ABSOLUTE STOCK AS A ROCK example should read around 7-8psi boost and only reach 3/4 of the way on the factory boost gauge.

If yours goes all the way to the one either your boost guage is faulty or the car has a bleed valve installed which has increased the stock boost.

stock turbo doesnt like anything near or above 1bar of boost....ie 14psi.

an ABSOLUTE STOCK AS A ROCK example should read around 7-8psi boost and only reach 3/4 of the way on the factory boost gauge.

If yours goes all the way to the one either your boost guage is faulty or the car has a bleed valve installed which has increased the stock boost.

stock turbo doesnt like anything near or above 1bar of boost....ie 14psi.

Yeah, I figured that was about right, I'll have to keep a closer eye on the guage next time I drive her, and see just how far she does go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
×
×
  • Create New...