Jump to content
SAU Community

Recommended Posts

Hey ppl, i got some issues with the speedo in my ceffy. It seems to be out by aroung 20 km/h at 100, like i'm doin 100 but it says im doin 120. it seems to get progressivly further out, like at 60 it says im doin 70 and at 160, well the speedo is off the clock, and the speed limiter still hasn't cut in. at first i thought i had a lower diff ratio, but that doesn't explain the different variations. Also when I accelerate slowly the needle goes round smooth, but if i boot it the needle jumps 20 km/h at a time, like from 140 straight to 160. Anyone have any ideas???

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/
Share on other sites

same problem here... (also the km readings are higher by around 20%, ie. clocks 1.2kms every 1km i travel... :D will be - factor when i sell the car)

in my case, the problem most definately is the small tyres that came with the car as my mechanical-minded friend told me (read sky80y) ;) the tyres on the car atm are 195/55/15s... i'm getting 205/60/15s soon...

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239750
Share on other sites

I think your needle is toast, I replaced my speedo because that happened to me, I have an aftermarket diff and 18"s on mine and my new speedo is only 5km/h out. When im doing 100 speedo reads 95. I got that information courtesy of a dyno

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239773
Share on other sites

205/60/15 are what i run, i thought my tires were to big, but if they were too big i'd be goin faster than what my speedy said, just on a side note, nissaner, do you go to the off street drift at oran park?

hmm... maybe the problem wasn't my tyres...

and no i'm yet to goto those drift meets in my ceffy... public streets are challenging enough for novice drivers like myself... :D

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1239890
Share on other sites

I have been told also that they Ceffys have a common fault with Speedo cables breaking as I have been through 2 so far. ( have a few (4) coming from jap in the next container)

Also the sensor in the G/box has been know to do the jumpy thing in speed as it does it with my ARC-R

Will follow this up when it all arrives

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1240503
Share on other sites

  • 2 weeks later...

my cef does the same thing with the speedo, i.e doin 100km/h on speedo but only doing 85km/h on the road. But mine has stock size rims/tires, i.e 195/60 15in. But i have a locked diff aftermarket manual conversion.

By the sounds of it this is a common problem.

David

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1252448
Share on other sites

My speedo is consistantly 10% higher than what I'm actually doing, I base this on the speed reported by my Impakt DigiDash (takes it's data from the diagnostic port) and other traffic.

The needle also "floats" if you know what i mean, it just doesn't seem to move right and wobbles a bit back and forth from time to time, I have a feeling it might be the cable where it hooks up the back or gearbox isn't quite right but have yet to check it out.

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1253545
Share on other sites

  • 2 weeks later...

I seem to be having the same problem with my cheffy. I just picked it up at Freo port today an it seems to be out around 10-15km at 60km/h. I know it has been converted from auto to manual, maybe they didnt get the manual sheepo cord.?

that is all I can think it might be as putting on bigger rims shouldnt change affect the speedo that much.

Link to comment
https://www.sau.com.au/forums/topic/66617-speedo-problems/#findComment-1277373
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...