Jump to content
SAU Community

R32 LCD Display Problem

TimmyB
 Share

Recommended Posts

TimmyB Contributor

TimmyB

Posted
Posted

Guys, I've had the R32 GTSt sedan for a few weeks now and i totally love it. Haven't been able to go for a real long drive yet as i'm still waiting for seatbelts to get it complied. (you guys would know how hard it is to have your car sitting in the garage and not being able to drive it. It SUCKS.)

Any way, i've been checking everything out and my LCD display for the climate control isn't working. It just doesn't come on. Has any one come across this before? I'm thinking it doesn't have power, but not sure how to check.

Does anyone have any idea what it could be??

Thanks :rofl:

Link to comment
https://www.sau.com.au/forums/topic/66694-r32-lcd-display-problem/
Share on other sites
TimmyB Contributor

TimmyB

Posted
  • Author
Posted
i can be tunred off, when the car is on just press the fan, temp, or auto button.  And if it dosn't come on it might need to be looked at

Thanks dude, i'll try a bit more tonight, and if nothing comes from it, i'll take a closer look at it. I have the dash apart at the moment installing a stereo, but theres a lot of wires back there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Neostead2000
      Water leaking into the rear trunk

      By Neostead2000 · Posted

      Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • Ozdavroz
      Lifted R32? Jay (LowStandards) has you covered.

      By Ozdavroz · Posted

      I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • GTSBoy
      WTB-R32 gtst front bar-sydney

      By GTSBoy · Posted

      Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...