Jump to content
SAU Community

Recommended Posts

I've got an R33 which still has the stock speakers which I want to replace with my old sony xplode splits. (in the front door)

The sonys dont fit where the stock speakers are so I'll have to remove that plastic housing thing.

After the stock speaker + housing is removed, how should I secure my sonys in the front door? Should I got down to the local hardware store and buy some MDF, cut a hole in it for the speaker, then using ?something? secure the MDF to the door.

I've got no idea, i'm no good when it comes to practical things.

suggestions, pics, etc. welcome.

Thanks, Mark

A car audio friend told me to get 3mm for the doors and 10mm for the boot - which I did.

I tried replacing the rear speakers first and that took me way too long so I haven't got around to the front ones.

At least i've taken the door trim off before unlike parcel shelf.

Mark

yeh its a time consuming thing to do. rear parcel shelf ain't too bad to do, once u know how to get the rear seats out!

3mm might be right for the front. depends on how deep ur speakers are.

i'm not sure how thick u need to go for the back. i actually used 3mm for the back and glued it to the old shelf then re-carpeted it. u need a bit of flex in it so u can actually fit it back in...

u can use the old shelf as a template to make the new one tho.

  • 2 weeks later...

I made some rear speaker mounts out of MDF using a old hacksaw blade to cut the shape and I used a self taping screw to make my holes.

A picture of what I did is here: MDF speaker mount I made and underneath view (inside boot) .

Let me know if you see any faults or if I could have done it slightly better.

I'm ready for the boot where I want to mount my amp on a 10mm piece of MDF. I've also got a 10" soundstream sub a ordinary looking box.

All speaker wireing looks like it runs down the driver side of the car and the battery in a skyline is in the boot on the passenger side. Where would be the best place to mount the amp? close to the battery on the passenger side or close to where the wiring is on the driver side?

I want the install to look good. Should I attempt flush mounting the amp and doing so will that create overheating problems?

To give an idea this is my boot my boot with the spare tyre etc. removed. I want the tyre etc. to retain the standard look, i'm thinking of making a back wall out of the MDF behind the metal bar in the boot... is this the way to go?

Thanks for the help again.

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...