Jump to content
SAU Community

Recommended Posts

found out last week that my rear right shock is leaking oil...

i was going to get all my shocks replaced and the car lowered... ferni mentioned something about getting the damaged one resealled - does anyone know anything about it? as in, if it's worth it/cost etc?

I wasnt really considering it until, the thought of putting the money (i'd save by not getting new shocks all round) towards a new plasma tv hit me...

any ideas?

Link to comment
https://www.sau.com.au/forums/topic/67022-resealling-leaky-shocks/
Share on other sites

Hi,

Going thru a similar process, but found nobody could do anything, basically you can wait 4 weeks for nisan to get a new standard rear shock for $181 or get a second hand one from T&H wreckers for $175 or go to pedders like I did and get a pair of theirs for $360.

Good Luck

i had the same problem, left rear was leaking real bad...i wouldnt bother with resealing, i dont even know if anyone can do it...

the chaepest option for you is get a new set for the rear(its best to get them in pairs), installed it will cost you around $350-$400. These are after market ones, most likely pedders comfort or something like that..I can recommend a very good place in rowville that can do this for you, let me know if interested.

by the way i couldnt help myself and got a set of adjustable TEINs...must say kinda hard but shite load better than standards.

yeah ppl have been hinting for me to get teins... i dunno what to do... trying to weigh up what'll shit me more:

(1) brand new house, curtains and furniture with a shitty tv when i could get a plasma

or

(2) seeing soo much damn space between my wheels and arch

i know i could just do rears but then i'd regret not getting em all done... how much were ya teins?

i got quoted 1600 of koni's all round, springs, lowering and wheel alignment... hate getting quotes... still waiting for more...

well at the time(about 4 months ago) i was looking at getting TEINs, TEIN australia had a special going for around $2100 for a set, but i managed to source some very good second hand ones for $700, and installed them myself...

by the way from personal experience i much prefer LCD to plasma TVs :)

Teins are usually way to hard for street use, unless your using your car on the track. Are yours coilovers Jetdat? what spring rates are you using?

As for LCD's they are getting better now with better response times, but still way to expensive, if we had 15k to blow i'd buy a proper HD 45" Sharp LCD, 1920x1080, but we don't have 15k :) So i figure a cheap SD plasma will do for a couple of years till a proper HD LCD/Plasma comes into our price range, then move the SD Plasma to the bedroom.. we'll see.

yeah they are coilovers, dont ask me about the rates as they were second hand, but they have a secondary coil which is supposed to be called 'helper coils' for softer ride(this is what the dude that sold them to me said anyway)...

i have driven a few lines with teins, my ones seem much softer to the others...

as for the tv, you get what you pay for.

i wouldnt touch pedders stuff... Its the devil.... I think you have a nice car and you really should just bite the bullet - spend some good money - get a good result. Rather than do half the job now and regret it... I can understand that you wanna save for puttin stuff in the house and all.... difficult situation.... Maybe try get some 2nd hand ones from SAU forums.... someone has to have sumfin

try my mate www.slidewizeimports.com

I know the owner of koni suspension... i should see what i can do

THERES MY 2 cents

found out last week that my rear right shock is leaking oil...  

i was going to get all my shocks replaced and the car lowered... ferni mentioned something about getting the damaged one resealled - does anyone know anything about it? as in, if it's worth it/cost etc?

if you get one fixed, get all of them done at the same time.

otherwise 3 will be saggy as, and one will be nice and fresh and the car wont be sitting nicely anymore.

So going the full replacement.lowering would be a better option for $$$ spent

try centreline suspension for it.

94692914

Dunno if they'll be able to help you or not (for resealing the shock). But they had aftermarket stuff rebuilt for me.

If not they have stuff there anyway

At any good suspension dealer you should be able to get a pair of rear shocks and lowered springs brand new at a reasonable price. Try getting trade price, and if you are trying to save money, maybe go for KYB or Koni struts - roughly $250 for the pair and King Springs - $200 for the pair. If you can install these yourself, again you will save some more money. Conventional strut and spring setups are more than adequate for street use, and give a better ride than coilovers.

Thats whos going to do mine for me. Heard some good things about them here, went down and saw them and they gave me a real good price for new shocks, springs and tyres. Better than anywhere else plus the guy I spoke to was real helpfull. Just got to wait a few more weeks for the shocks to be in stock now. Can't wait to get it all done and take it through some twisties.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...