Jump to content
SAU Community

Plastic window wind breaker thing

replicate

By replicate,
in Four Door Family & Wagoneers

 Share

Recommended Posts

replicate Community Regular

replicate

Posted
Posted

Does anyone have a drivers side one they'd care to part with cheaply? I don't even know what they are called. Like a wind breaker or something for the window. My drivers side one didn't seem to make the trip over. Looks a bit funny with it missing and i'd like to keep the rest on.

Link to comment
https://www.sau.com.au/forums/topic/67030-plastic-window-wind-breaker-thing/
Share on other sites
Mr Eps Grand Master

Mr Eps

Posted
Posted

i can help you out if you're willing to pay for postage, they are clean, no cracks, got a whole set,

i personally took mine off, you can use glue remover to get the glue off, also, beneath the boomerang things is C.H.R.O.M.E. and that spells chrome, which is J-pimpin

S13Deviat Grand Master

S13Deviat

Posted
Posted

There is a product called 'Gumption' (something like that) which is absolutly awesome. Gets rid of anything!!!! Comes in a tub about the size of a margerine container and looks like a white paste. Try your local kmart or hardware store. Another product is called Gumrid...comes in a little bottle of liquid....also pretty good.

Hope it helps

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
There is a product called 'Gumption' (something like that) which is absolutly awesome. Gets rid of anything!!!! Comes in a tub about the size of a margerine container and looks like a white paste. Try your local kmart or hardware store. Another product is called Gumrid...comes in a little bottle of liquid....also pretty good.

Hope it helps

Right on! Same with big kevs goo remover.

Mr Eps Grand Master

Mr Eps

Posted
Posted

damn you daveo i was oabut to say goo remover IM EXCITED!!!!

be careful with gumption, that guy ain't lying it gets rid of anything including my ex girlfriend who dissappeared due to a self-inflicted stab wound to the back. also it gets rid of paint if you abrase too hard,

either that or a liquid based eucalyptus cleaner will work, with a (very) carefully used scalpel it should come off easy, phone up a panel beater they will be able to help you out easy peasy

=premo= Mentor

=premo=

Posted
Posted

i take it we are talking about weatherstrips over the top of the doors?

if so... i would realy like to get my hands on a set for my 4door R32. if anyone wants to make an offer ($) etc.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Thanks Santa (the neverending trials of the 400,000klm, 400kw, RB30, manual swapped Stagea)

      By soviet_merlin · Posted

      Thanks Duncan! Yeah it's street use for me only. Maybe occasional track day. Any difference in noise when running with the two pumps? I would expect the lift pump to be more quiet than the main pump so hopefully not? And yes, unfortunately quite a big price difference to the simple hanger setup. Though I'm usually willing to trade money for better reliability and future-proofing. Buy once, cry once and all that. I'd be very happy to never have to deal with fuel pump / wiring issues again  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Bonnet clearance?
    • joshuaho96
      Magnetic Drain Plug Snapped in Half

      By joshuaho96 · Posted

      On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
×
×
  • Create New...