whats your gtr clutch of choice?

[mark morris]

Ok,

for those of you who have read my other post in this section you would know, Im re-installing my gear box in the near future, and as I have it out and my old clutch was slipping under "mild abuse" Im gonna install a new cluch. now the cluch is not that old and still has plenty of meat on it, but it looks to be a ceramic button single plate I think it says 3700 pounds on it( havent got it off yet, will be tonight though).

Anyway, I was just wondering what clutch you have put in your gtr, cost and if it performs well?

trying to find best value for money but dont want slippage. and I dont really want to go and spend 3k on a friggen exedy twin plate or somthing!

oh, and I just want to go down the track and quarter occasinally, no big mods just usual big exauts intake boost 1.2 bar stock turbos ect....

[7heavn]

I've got a single plate excedy button clutch in mine never had it slip on the street but has slipped a few times at the track it's about 3000km's old now . I'll be pushing more power soon so it will be coming out and replacing it with a twin plate which I should have done in the first place . Though saying that there are a few big power GTR owner in this forum with single plates that seem to be holding fine .

[saliya]

I had an xtreme single plate 6 puck clutch in my old GTR (210rwkw) that never slipped, cost around $600 from Adelaide Clutch. Drive it like a light switch and it will last forever (you will

wear out rear tyres faster though).

SW

[ayhanbala]

I also had an Xtreme Single Plate 6 Puck clutch in my GTR R33, no slipping at all even with 7000 rpm launches and perfect drivablity

[Guest DIRTgarage]

Ok,  

     for those of you who have read my other post in this section you would know, Im re-installing my gear box in the near future, and as I have it out and my old clutch was slipping under "mild abuse" Im gonna install a new cluch. now the cluch is not that old and still has plenty of meat on it, but it looks to be a ceramic button single plate I think it says 3700 pounds on it( havent got it off yet, will be tonight though).  

Anyway, I was just wondering what clutch you have put in your gtr, cost and if it performs well?

trying to find best value for money but dont want slippage. and I dont really want to go and spend 3k on a friggen exedy twin plate or somthing!  

oh, and I just want to go down the track and quarter occasinally, no big mods just usual big exauts intake boost 1.2 bar stock turbos ect....

buy yourself a custom jim berry race clutch and never look back.

[mark morris]

sounds like a 6 puk is pretty good value, dose some one have a number for adilaide cluch so I can give em a ring? whats a jim berry race clutch?(ie twin or single and whats it worth)

regards, Mark

[Stirlo_GTR]

I also have the xtreme 6 puk, ceramic button.

Its really nice actually, you can give it a real hard time, but still drive it (realitivly) normally. is fine when cold too which is not norm for a button. I got mine from UAS for $650 delivered exchange. www.uniqueautosports.com.au

cheers!