Jump to content
SAU Community

Recommended Posts

Hi guys,

Well this has been an on going issue now, but I am finnaly getting somewhere.

I wont go into everything, but I have had a turbo go and my throttle cable come off (at the same time) and car has not run since.

The engine is ok. I have now replaced the turbos, but the Injectors will not fire and hence it wont start.

I have tested the injectors with a golbe and they are not getting any power/signal.

I am sure that it will run once they are firing but I can not work out why they wont fire.

The fuel rail has pressure, I have had the TPS out and it tested fine but has been rebuilt to make sure.

The throttle system seams to be working fine.

We have perfect spark.

just no fuel.

I have thought about trying a different ECU but surely given spark is ok it wont be the ecu? Perhaps its the Injector power supply? is there a fuse for the injectors?

Any ideas? very frustrated....

Cheers Stirlo!

Link to comment
https://www.sau.com.au/forums/topic/67144-injector-issue-please-help/
Share on other sites

its not actually in any of the fuse box's, we have gone that avenue, but think that it may be the GTR's injector control system? as it may have failed or have a fuse in it. But we dont know where it is and or how it works, the 32GTR service manual does not specify (ie where the power supply is located or how does the control system work?)

Power to the injectors is constant through the resistor pack, and the injectors are earthed through the ECU with individual wires to open them. The resistor pack is on the drivers inner guard and has one power wire in and six out to each injectors so this is a likely start. I don't recall a fuse though but may be wrong.

Good luck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it was a bit of confusion with me, I rang and asked if they had a boot for a soft top, and then the paint shop when they rang and were asked if it had a hard top on it, which it does, just not a PRHT....LOL Meh, whilst frustrating for all concerned it isn't a war stopper and should be a thing of the past in a week or two In other N/A related news, car is booked in at the end of the month for the cams, springs, retainers, harmonic balancer and retune  I might even pull the lazy arse card and get them to do a full service on it whilst it is there
    • Factory LSD is supposedly a 2 way with a very conservative cam. If you've already tried adding friction modifier to the diff oil and it still locks up too much for your liking you might want to adjust the ramp rate on the cam to be more like OEM instead of reducing initial torque even further. People claim the 8 kgf-m disc kit for the OEM LSD is still very streetable but I've never been able to compare everything side by side on my own.
    • Oh man, at least it sounds they've accepted they stuffed up and not put it back on you...could see some confusion if they asked if it had a hardtop or not, and you've answered truthfully but maybe not answering their real question which is what roof did it have from the factory! Glad your keeping it N/A 2.5
    • Nah, I much prefer colour matched Talking about colour matching stuff, the new/used boot lid turned up, all painted up perfectly......aaaannnndddd, it's for a power retractable hard top, not a soft top.....LOL They are now sending a boot to fit a soft top.....,  whilst frustrating, life is like that sometimes, sometimes you just need to dodge, duck, dip, dive and, ummm, dodge.
    • You would need to paint your hardtop again though
×
×
  • Create New...