Jump to content
SAU Community

Recommended Posts

Yes & No,

Yes, because if you get them to work they basically work, and you can have extra features that you can have with a bleed valve, stoping boost from spiking, making it spike, gear & rpm specific boost etc.

No, because they can be a pain in the rectum to set up properly and can take some time. - refering to the Apexi AVC-R.

If you'r after a decent controller that is only been new to the market go with the JayCar electronic boost controller - You can't go wrong for $150 with the digital read-out Hand Controller.

For more info on the JC controller view the Nissan Stagea section under Vehicle Specific Discussion. :(

yep, so much safer to run ebc than bleed valve if you are wanting to achieve (or not go beyond) a specific boost pressure. there are plenty of posts regarding the pro's and con's of both if you are interested in searching...

There is a group buy for the Jaycar boost controller on now, if we get 2 more people they are about $48+GST for the actual boost controller and about $38+GST for the hand adjuster.

So buy one! Then i can get mine for cheap too...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...