Jump to content
SAU Community

RB26DETT Conversion


Recommended Posts

I'm doing it on a Manual GTT.

Including labour and the following bit's it's been around $13,000

R33 GTR Engine inc Turbos

Tomei Poncams 260' in & 252' ex Camshafts (Type A kit)

Denso 550cc Injectors

Apexi Power Intake GTR kit

HKS Downpipes

Apexi PowerFC

2x Z32 AFM's

New R33GTR clutch to take the power

Link to comment
Share on other sites

It's an expensive conversion proposition... especially on an n/a auto!

to be honest... you may even get a better result with the rb25 engine and spending the extra $ on the ancillaries, rather than a dead stock rb26dett and no cash left. rb26dett when something goes wrong tend to be kind of expensive.

Link to comment
Share on other sites

Go the cheaper option an get a RB25DET front cut from a GTT or a Stagea. A lot less expensive and a lot easier!!

Don't underestimate the RB25. With the right parts, it can still scare the living s**t out of passengers, not to mention yourself!!!

My 2c worth :cheers:

Link to comment
Share on other sites

Yeah the Rb25 motor is great, i would just by the 34 gtt and just spend the cash on it or just buy a series 2 r33 gtst they look kool and than spend even more on the gtst, for about 20,000 you can get a nice series 2 r33 gtst spen 10 to 15k on it and youll have a low 12 second gtst for sure. If you want i can suggest a packge that will get u there.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • You all are absolute legends! Thank you for helping me put this into context with your comparisons!
    • There's probably an underlying issue with the A/C system too. I recently fixed mine, now it's fully control by the Haltech and car's factory HVAC controller  Have a squiz here:    
    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
×
×
  • Create New...