Jump to content
SAU Community

Recommended Posts

Well like everyman and his dog I am in the process of picking up an R32 GTR from Japan atm. (Thru Prestige)

Anywho...I probably should have asked these questions before laying down the readies but...

1. I believe removal of a fuse is all thats required for 2WD / 4WD, can this be rigged up to an In Cab switch?

2. If so generally how strong is the rear diff, at handling this sorta stuff.

3. What is the Maximum performance (HP @ Wheels) I can expect with Factory comp, Turbos, injectors & IC...and which is the weakest link?

4. What would be required for 400-450HP @ wheels?

5. And what are the most common problems assc with the GTR mechanically.

Any help appriciated as I am sure these questions are asked all the time :rofl:

Cheers

Lindsay

Link to comment
https://www.sau.com.au/forums/topic/67719-r32-gtrquestions/
Share on other sites

1. Yes

2. Bomb-proof

3. 300hp (give or take engine healthiness and if you run a safe boost) Big cash not required

4. Turbos, clutch, injectors, exhaust (turbo back), remap or aftermarket computer

5. Clutch, clutch, clutch!

1. Excellent

2. Great

3. Hmm...pretty average..will have to work on that!

4. Not to bad...would High flowed standard turbos do the trick?

5. Ah..ha...well I guess its better than a Gearbox :P

Thx mate :)

Link to comment
https://www.sau.com.au/forums/topic/67719-r32-gtrquestions/#findComment-1257105
Share on other sites

The standard drive on the crank isnt wide enough to engage the standard oil pump properly.... which would have to be one of the biggest reasons so many early RB26s die. Its an engine out job as the collar has to be machined onto the crank, upgrade oil pump to N1 and then you will be ok

Link to comment
https://www.sau.com.au/forums/topic/67719-r32-gtrquestions/#findComment-1257119
Share on other sites

1. Yes a switch can be attched to the fuse to make it 2WD/4WD. Check out Autospeed.com.au there is a good article on there regarding the 4WD set up where he puts a dial to adjust the amount of torque transfer in differnt conditions.

2. Rear diffs are pretty hardcore, unless your being stupid with it, you should be right.

3. You'll get 300-320hp from a pretty standard (engine wise) Gtr, the turbos are only good for 1bar and usally the rear wheel breaks off over that, esp in 15yr old cars, so get rid of them asap. Usally the standard clutch and oil pump are pretty crap so get rid of them. The standard oil pump flows around 23lts at 6000rpm, a Hks or N1 oil pump will flow closer to 50ltrs at 6000rpm. So upgrade this.

4. For 400-450whp first thing i would suggest here is an engine rebuild. Although standard RB26's have been known to handle more, you are not dealing with a brand new engine here and getting more power out of an older engine you are starting to push its boundaries. But if it anit broke then dont fix it, so go ahead and mod it untill it dies. how long it will last is anyone's guess.

After that your looking at more general stuff, so upgrading exhaust, dumps, filters, then move on to bit more technical things. Turbo's, either n1 ball bearing's or 2530's get the 2530's these are awsome turbos and can handle good amounts of boost. Pushing over 400whp every thing starts to max out fuel system wise. The injectors are 444cc and can only flow around 530hp at the engine. (theres an equation somewhere on here that will tell you that.) Factor in about 25% loss to the wheels that brings you up with 400hp at the wheels before they max out.So upgrade to some 600-700cc ones.

Afm's will also max out at 400whp, so upgrade them too either Z32's with 80mm inlets i think or Rb25 ones which are only 72mm i think, still an upgrade but might as well go all out and get Z32 ones. The intercooler can flow enough air for over 400whp, but i have seen allot of people change tham around that mark. From my research the standard fuel pump is usally pretty good for this amount of power and im really not sure when a new one is needed. If you want bigger get a bosch 044 i think they are good for like 325 LHP @ 50 PSI, (correct me if im wrong please)

Next up grade would probally be a Power Fc, great Ecu's and plug into the standard harness, propper tunning of all this power should put you easily into the 400-500whp mark depending on boost settings.(get and adjustable boost controller for this, great fun)

5. Most common problem, probally Hicas, but thats with all skylines. For some reason who ever developed this system decided to put every fault to relay back to the hicas light. And when the system does go foul, travelling over 100km p/h can be scary. Quick fix, pull the 4pin plug out of the hicas computer under the parcel shelf. Long/proper/expensive fix, track down an ecu consult, plug it in and let it tell you all the problems and then fix them.

So once all that is done you should have a nice car with good power. Dont expect to have much money left though unless you have lots of it.

Link to comment
https://www.sau.com.au/forums/topic/67719-r32-gtrquestions/#findComment-1257390
Share on other sites

1. Pull the fuse for lots of wheels spining fun

2. Have not broken my diff yet and i like to do burn outs and rev limiter launchs,, HEHEEHE

3. Mine made 331hp on 14psi with 4" zorst nothing else

4. N1's hks 2530 or 2540's with proper support system ie fuel comp yadda yadda

5. CLUTCH did i say CLutch amd now have a prob with a valve guide in the engine ticking its head off but i have a replacement head of a 33 GTR.

Have fun and remember simple things like oil changes keep the thing alive, you would be best to change everything as soon as u get it, gearbox oils diff oils brake fluid you gewt the idea better to be safe then sorry and spark plugs cause of alot power lose to if they are ****ed

Link to comment
https://www.sau.com.au/forums/topic/67719-r32-gtrquestions/#findComment-1257408
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...