Jump to content
SAU Community

r33 '96 gtst - 15'000


Recommended Posts

HEY WHO WANTS THE BEST DEAL YET!!? R33 GTST , 86,700 k's, silver, under the hood is a STANDARD rb25det,plus, k&n pod filter, 3" cat back stainless exhaust with a 6" tip, a small b/o valve, and a cool down timer! interior is EXCELLENT CONDITION, all original(except stereo, kenwwod cd player), including steering wheel and floor mats, plus tint and seat covers, outside you get a set of twin 5 spoke 17's sitting nicely in good rubber, it has all the fruit you get from nissan, car was complianced in march 2003, has had 1 owner since dealer, LADY DRIVER for past year, not used for past 6 mos. due to me injuring my back at work. we are DESPERATE TO SELL and we are looking for offers over 15,000, EXCELLENT START CAR for a TUNER call stets on 0428 256 882 or 08 9304 4383 car is in perth wa, car is unencumbered, and ready to go please see http://www.carsales.com.au and enter search as follows: nissan skyline series 2 in west aus, please note some photos have been edited to remove some serial numbers, serious buyers can be forwarded original photos, also front bumper was replaced due to lower lip being left on parking curb at shop

Link to comment
Share on other sites

Hey Stets, I came and saw this Skyline... you should also mention that its got an EXREEEMLY BAD Vibration when you get upto 75km's per hour.

And you told me that the front bumper got damaged when you drove into your driveway because it was on 2 much of an angle... ??

Im not sure if you know about the car that much, its registered in your name isnt it??? And didnt you did mention to me that you had a GTR at one stage so I thought you would have known that this isnt a series 2.

Ahh well, Id say you should re-advertise it as a Series 1.5 and make note of the vibration that it has.

No hard feelings.

- Adam

* This has been edited.

Link to comment
Share on other sites

ok adam, yes it did have a vibration, has had a mechanical inspection, found it to be a worn uni joint, $100 later and smooth as a babies ass, yes the bumper has been replaced, and not painted and yes it is off an earlier model series 1, no arguements there. also after taking it to the mechanic (a specialist), we found out that the car was involved in a very minor front-end accident to the front left and bonnet (in japan), the car was fixed cheaply and series 1 front guards and bonnet where used, so as to match each other. however the car is a series 2 has all the features of a series 2 and is mechanically sound, and we had no problem selling the car to a dealer for a reasonable cash offer, thank you for the $100 deposit that you sacrificed and the dis-respect of not even phoning to let me know that you were backing out of the deal. the $100 deposit you left was enough to fix the vibration and the front bumper was quoted at $250 to respray, i was honest with the reason for sale, my financial situation was explained, and i apologize if you find it so hard to accept that you just couldn't get what you wanted for your commodore, but we got what we wanted for ours and you paid to fix your biggest downpoint on the car which was a small concern in the end. and no my back aint feeling any better, but thanks for asking anyway

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
    • You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
×
×
  • Create New...