Jump to content
SAU Community

Recommended Posts

anymore? so you've had this problem as well?

That is correct.

Mine was coilpacks but those 3 light can mean anything.

Hence why I keep telling you to RUN THE DIAGNOSTIC TEST

Because that will tell you what the ECU sees as the problem. :idea:

-______________________________________________-

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

i tried the search function and the best explanation i found was troy's.

1. i didn't know how to 'short'... now i know you need a paperclip, but what 2 wires?

2. haven't found anything on how to read the flashes the troy was talking about

i'm sorry, but i'm a newb when it comes to this, so i wasn't sure what to do... and still not 100% but i guess i've got enough info to give it a try...

ok, this is from memory.

Locate the diagnostic port.

It is below the steering column, on the drivers side.

It is a small panel you open and it will drop down with a grey plug.

Have a look at the back of the plug.

You will see 2 wires next to each other on their own.

That's the two wires you need to connect via the paper clip to get it working.

Turn the car to accessory mode.

Short the 2 wires on the diagnostic port.

You will see the lights on the dash flash (I think it's the check engine light)

long flash is the first number

short flash is the second number

example

21.

flaaaaaaaaaash

flasssssssssssh

flash

I think the end of codes code is 55.

This is ALL from memory, so I might be wrong on some parts.

Let us know how it goes.

Ok. Got Temp rego, and got insurance with Shannons.

Took the car down to workshop on Sat morning... same thing, car heats up to normal operating temp, and starts running like shit, and the lights come on.

Was driving on "a" hwy, so i could open her up a bit, so just get driving it, doing laps of the hwy. Some times the power delivery got kinda jerky, like it would rev to 5K, then like drop back, then kick on again. But after some more driving, started to become smooth again. Turned car off/on, and the lights went off. So now i'm thinking, it just need a "real" drive, not something just around the block.

Bring car back into workshop, plug in scan tool. ECU has logged 'Code 21' - some sort of ignition problem. So it's most likely the coil packs? - Got the scan tool to clear the codes, and the car was fine. Even though it's running fine, should i still change the coil packs?

anyways, so yeah. Code 21, i'm guessing that's the same prob you've got there Ryan.

Bring car back into workshop, plug in scan tool. ECU has logged 'Code 21' - some sort of ignition problem. So it's most likely the coil packs? - Got the scan tool to clear the codes, and the car was fine. Even though it's running fine, should i still change the coil packs?

anyways, so yeah. Code 21, i'm guessing that's the same prob you've got there Ryan.

Bingo Bango! Yes change the packs as they get worse, then die completely. Get splitfires!!!

that's $650 bucks!!! is it bad for other parts of the car driving it with bodgy coil packs?

Yes cause it's running like shite, not only will you get the shits when it's gutless and running on 5 cylinders, you'll have a dead cylinders that are getting their lubrication removed by unburnt fuel.

They're are some packs on e-bay at the moment for $150...may be a cheaper temporary option?

god damn it! Checked the vacume sensor and the hose had a crack in it again, i fixed it for good this time, a much better quality hose as the stock one was a shotty plastic piece of crap.

I can't see how a 5 year old or so R34 has coilpack problems.. when my 15 year car doesn't have any sort of problem with its original coilpacks.

Doubt its coilpacks. Have you even reset the ECU to retune itself to australian fuel?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Interesting. Some of them were tight to lol
    • That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
×
×
  • Create New...