Jump to content
SAU Community

AFM Cleaning and de-meshing, the popup book version.

Sciby

By Sciby,
in General Maintenance

 Share

Recommended Posts

Sciby Experienced

Sciby

Posted
Posted

Howdy all,

I've just recieved my new happy A'pexi Super Happy Fun Power Funnel airfilter, and I was pondering what I had read in the AFM cleaning thread, whether I should do it or not.

Well, I did it. Here's the pictures for the people who aren't sure.

116-1605_IMG_small.jpg116-1606_IMG_small.jpg

Here's the old HKS filter pod, dirty as a dog's bum, along with the rest of the engine bay. On the right is the AFM, waiting for the cleaning of a lifetime.

Sciby Experienced

Sciby

Posted
  • Author
Posted

116-1607_IMG_small.jpg116-1608_IMG_small.jpg

I decided to take the HKS pod and the AFM off in one piece, here on the left, I've undone the hose clamp and wiggled the AFM out... tight fit. There's the sensor data cable, give that tab on the left a really really good squeeze, it should click, and it should pop straight off.

Sciby Experienced

Sciby

Posted
  • Author
Posted

116-1614_IMG_small.jpg116-1615_IMG_small.jpg

That's the front mesh there, it was utterly black when I got it out, I wiped all the gunk off the front, but I still ran a towel inside it later on. You can see some of the crap inside the afm, and this was after a blast with the contact cleaner

Sciby Experienced

Sciby

Posted
  • Author
Posted

116-1616_IMG_small.jpg116-1619_IMG_small.jpg

Oh, here's the contact cleaner now, getting to know the AFM on their first date. The large chunks of wood are from an unrelated project. The rear mesh, or remains thereof, is on the right.

Sciby Experienced

Sciby

Posted
  • Author
Posted

116-1620_IMG_small.jpg116-1622_IMG_small.jpg

The new air pod and the AFM meet, you can see on the right the total reaming of the old mesh area place thingy. That first photo is quite arty, with the ScibyLine just out of focus on the right... I could be a marketing photographer... or... er... maybe not.

Sciby Experienced

Sciby

Posted
  • Author
Posted

116-1624_IMG_small.jpg116-1625_IMG_small.jpg

The pod and afm move in together, they certainly seem happy together so far, and all their bits fit perfectly. Maybe I'll here the sucky-sucky of little filters in the engine bay soon... and yes, the socket set is a new mod, good for another 30hp at the wheels. With a bit of tweaking on the 12mm socket, the ScibyLine will run 9's. True shit, bro.

Also reset the computer, and it all seems happy. Runs and idles much better, revs much freer down low and I accidentally... well... almost accidentally... okay fine, I dropped the clutch at about 5k and burnt the clutch for the 3rd time. You happy now?? :D

(Cleaning out the AFM seems to not hurt anything and I can see how it would be beneficial. It's part of my servicing now.)

akeenan Grand Master

akeenan

Posted
Posted
okay fine, I dropped the clutch at about 5k and burnt the clutch for the 3rd time. You happy now??  

speaking of burning clutches I "accidently" did the same thing and had a horrible smell lingering around for a while....

is this a good thing? im thinking not how much abuse will the standard clutch take...(maybe this should be a new thread) oh well..

Sciby Experienced

Sciby

Posted
  • Author
Posted
Originally posted by akeenan

 

speaking of burning clutches I "accidently" did the same thing and had a horrible smell lingering around for a while....

is this a good thing? im thinking not how much abuse will the standard clutch take...(maybe this should be a new thread) oh well..

Meh, I started the thread, so I'll forgive you...

No, stinky stinks are bad.

In this case, if you give it a bit and it feels like the engine is bellowing but the car ain't moving like it should, or like the wheels might be spinning, but there's no screeching, then the clutch is slipping. You'll get a horrible smell through the aircon. Just buy a new clutch plate because once they start dying, they die faster and faster.

GiJOr33 Experienced

GiJOr33

Posted
Posted
Just buy a new clutch plate because once they start dying, they die faster and faster.

they certainly do!!!

i've just picked up an OS Twin Plate clutch... so hopefully no more slippage.

I'm looking at getting one of those Filters... i don't have an AFM at the moment, running MAP. But as i am in melbourne and there isn't anyone to tune HKS FCON's properly, i'm thinking of changing over to a Power FC and Z32 AFM

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...