Jump to content
SAU Community

Recommended Posts

Just out of curiosity, is 380 kms with a tank(60Litres), bad?

mixed city and highway (decent) driving, no major mods.

Could it be better? if so.. how? and don't say, don't drive a skyline :)

That is almost 16L/100Kms for a 2.6L car :)

Im just not very happy with it, and wanted to see if you guys out there are in the same situation.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/68916-petrol-consumption-r33-gtst/
Share on other sites

you say your talking about an r33 gtst with no major mods.

so how is it a 2.6L????

anyways, i get around 450l per tank, which i am pretty happy with, i end up with a 11L/100Km's average, but thats when i drive around changing before 2500rpm.

i do also give it a hit at least once each time i drive the car.

Hmmm...I was just about to put up a similar post Ricoh :)

I've been battling the whole fuel consumption thing for a while...like most of us. My set up is relatively mild: 3" front/dump, 3" HF Cat, 3" Kakimoto at the tail, Trust Pod.

Last weekend, I put in a new O2 sensor which seems to have helped a bit (There are many threads about this by the way). I was getting 350Ks max from a tank (Running on/off boost...it didn't matter) but so far I have got about 120kms from 1/4 tank (BP Ultimate)...do the math...hoping for 480ks a tank. This is an obvious improvement so I recommend fitting a new one (O2 sensors only last 40000Ks, when they go kaputt, the ECU runs rich by default). I fitted an EL Falcon O2 sensor which cost me $86 from Motor Traders (A hell of a lot cheaper than the $180 Nissan Genuine part). The only catch is that you will have to cut and re-wire it to fit the Nissan connection...No big deal, the colour of the wires are identical. I can give pics if you want them.

I also cleaned the AFM with some contact cleaner that you can buy from Dick Smith. I am using a Trust Airinx pod but I need to partition it to eliminate some of the hot air. This should help the efficiency a bit as well. NGK Platinums are also a good investment.

Always remember the obvious: Tire pressures/alignment, oil viscocities (Not kidding), fuel filter, type of fuel, injector cleaner.

At the moment, things are looking promising, even if I squirt her a little just to make my presence heard :)

By the way, I would never tell you to "Not drive a Skyline" :) I would rather pay an extra $20 a week on fuel than drive a tryhard OZ performance POS :)

Remember, she's quite a heavy, well built car so heavy fuel consumption is a trade off. Luckily we don't have to rev the Sky's tits of to get some performance out of them...it would be even worse then.

Last weekend, I put in a new O2 sensor which seems to have helped a bit (There are many threads about this by the way). I was getting 350Ks max from a tank (Running on/off boost...it didn't matter) but so far I have got about 120kms from 1/4 tank (BP Ultimate)...do the math...hoping for 480ks a tank. This is an obvious improvement so I recommend fitting a new one (O2 sensors only last 40000Ks, when they go kaputt, the ECU runs rich by default). I fitted an EL Falcon O2 sensor which cost me $86 from Motor Traders (A hell of a lot cheaper than the $180 Nissan Genuine part). The only catch is that you will have to cut and re-wire it to fit the Nissan connection...No big deal, the colour of the wires are identical. I can give pics if you want them.

Pics would be good mate!, Ill give that a go and see if it works for me. Thanks

I had a once off distance of 650km to a tank.

I was driving on the space saver spare wheel for half of it (had a flat in sydney, drove to newcastle and back on it before I could get the tyre repaired).

So half was normal commuting, the other half was freeway driving at 80-90kph.

Cheers Terry M. and btw you wouldn't offend me by giving me more info since my knowledge level when it comes to all of this is very limited.....to say the least :D

Now, I have another issue that I havent even noticed before.... every week regardless of how much petrol a have left in the tank I fill it up again...now, the first 200 k's ,the petrol gauge doesn't move at all, then it starts moving down slowly past the full tank line and then...you can almost see it go down as you drive, it almost goes down 3 1/4 of a tank in 80 to 100 k's. weird. anyone with the same problem.? or anyone know why this could be happening?

Thanks guys!!

I have the same problem, the guage is all over the shop after 60Ks from filling up. I wouldn't be too concerned. I resist the temptation to look at the guage until I get home and I'm on my level driveway, then I get an accurate reading.

It seems to vary heaps depending on road level...stupid pedantic thing.

If I can help with anything mate, feel free to PM me...I've been around Sky's for a while now ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • This came quicker than I thought. It ain't even 2025 yet.
    • I somehow quoted my post instead of editing it. I regret nothing.
    • STOP GOOGLING FAB9 MAKE BORG WARNER EFR KITS FOR THE NC. THEY PACKAGE AN EFR 6758. DO NOTHING ELSE. CAPS INTENTIONAL. THE BEST RESPONSIVE SETUP EXISTS FOR YOUR CAR, AND HAS BEEN PROVEN FOR QUITE SOME TIME NOW. IN B4 "BUT I WANT EVEN MORE RESPONSE, IN A SIMPLER, MORE RELIABLE PACKAGE" WHICH IS A LS.
×
×
  • Create New...