Estimated kw's for these mods?

[boosted_32]

Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

MODS THAT WILL BE GOIN ON:

GTR fuel pump

GTR injectors 444cc with resistor pack

Adjustable fuel reg

s/s low mount manifold

T3/T4 turbo ( uses T4 .60 compressor housing with standard RB20 exhaust housing which has been machined out and fitted with a lager T3 steel exhasut wheel.

The standard ecu will aslo be rechipped by P.I.T.S to suite the upgrades

any have any idea of how much kw's I would be pulling @ wot psi with these upgrades b4 I get it dynoed???

also any feedback would be good on other mods I may need to support the mods that are goin on.

Thanks

[blackrb20silvia]

just an guess but id say bout 230Kw depending on boost say bout 10psi mybe 250 on 15-18psi

what do you think?

[Acidik]

Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

Ok please correct me if i am wrong but isnt 250rwhp a bit optimistic from a standard turbo with standard fuel system out of an rb20? or do u have an rb25??

I had mine dynoed at P.I.T.S the other day and got 185 rwhp with the identical mods, matti said his dyno reads 10% low so it works out at around 200rwhp....he said this is quite good for a standard turboed rb with my mods (including 14.7psi)....

any thoughts??

Trev

[silver gts-t]

Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

Thanks

power seems high for these mods.

this rb20 or rb25?

edit: beat me to it

[boosted_32]

Hi guys I can guarantee you that my car being an R32 skyline with the RB20DET was dynoed at 250rwhp well actually 249.1rwhp that’s also with 150,000kms on the clock as well. So hopefully by adding the other mods at the same boost of 1 bar should bring me close to 250rwkw. Any more feedback would be appreciated

Thanks

[silver gts-t]

there has to be something else,

sure the turbo isnt from rb25??

computer chipped???

dyno exaggerated?

[oscar32]

Mine is being tuned today, and with a hi flow turbo think it'll strain to get 200 rwkws, with all the mods you've listed as well.

I'd expect around 260 - 280 hp with the new mods you've listed, but thats what you already had......

[boosted_32]

there has to be something else,  

sure the turbo isnt from rb25??

computer chipped???

dyno exaggerated?

Mate I was there when it was dynoed and there is nothing wrong with his dyno at all he was quiet shocked at the time cause he said he has dynoed a few other 32's b4 will thos basic mods that didnt pull that sorta hp it was ran twice on the dyno 1st time was the 249.1rwhp and 2nd time was 248rwhp maybe cause it was hotter the 2nd time. The only mods at the time of the dyno was the 3"zorst with 3"s/s dump eletronic boost controller set @ 1 bar BOV, POD and Front mount. has a blitz accsess ECU now but was not on that at the time of dyno. will let you know what shes runs after all the new mods have been put on anyway.

Thanks

[R32-GTS]

When i used to have my r32gts it made 250rwhp with the same mods. Iv'e seen as high as 270rwhp with that setup so its not unusual . Some rb20's just make weak power and some are really good. Unlucky to have a shit one.

[silver gts-t]

so weird.

anyone else that can comment with similar mods

i got 150rwkw from

3" exaust and pod

was at 9psi

[jazza08]

Ye alot of RB20s will pull close to 250rwhp with those mods.

Some are weaker and wont...

[Wazz]

i pulled around 245rwhp on the dyno a while back with 10psi rb25 turbo and turbo back custom exhaust.. stock computer.. my dyno sheet looked similar.. just my line kept goin straight up on the angle untill it hit redline so yer thats decent bit of power with stock turbo

[jazza08]

Thats alot less boost than 1bar (14.7psi) too! But rb25 turbos are a fair bit more powerful? Did you have a FMIC?

[Wazz]

no FMIC its goin on soon.. brakes first tho.. and now that i've got my 5stud hubs that'll be very very soon

[jazza08]

damn those rb25 turbos must be pretty sweet upgrade for that figure even with a stock cooler!

Does it bolt straight up and does it need a new dump pipe or anything??

One more thing.. what u mean now u have 5 stud hubs? Do you have a r32? They come wit 5x114.3 standard, so what u mean now u have...?

[Wazz]

i have rb20det in an silvia.. with 'stock' CA brakes*worst nissan brakes EVER* hence the reason im doin 5stud conversion with r33 GTST brakes all round than the front mount is goin in

it also bolts straight on dont have to change anything how ever i had a custom system made up from turbo back 3" straight thru split dump one 3inch straight thru cannon at the back with 4 inch tip split dump has 3inch for turbine and 1.5inch pipe for actuator flap

[jazza08]

sweet as dude

Atleast u know u have a good engine! hehe

Says u sell things, let me know if u come across a good condition rb25 turbo as ill be on the look out now hahaha

[boosted_32]

My mate had and RB20 in a silvia and it had the stock RB20 turbo and running no boost as it didnt have a controller and all it had was an exhaust and he smoked me. becuase they are about 300kg lighter then an R32 skyline.

[Wazz]

boosted_32.. is your name andrew? is your 32 black? and do you live in cairns?

well yer i got a mate with a r32 gtst same as much just stock turbo running 13psi while i run 10 psi.. and yer i hose him the weight makes a huge difference

[boosted_32]

boosted_32.. is your name andrew? is your 32 black? and do you live in cairns?  

well yer i got a mate with a r32 gtst same as much just stock turbo running 13psi while i run 10 psi.. and yer i hose him the weight makes a huge difference

No my name isnt andrew and I live on the Gold coast