Jump to content
SAU Community

Recommended Posts

Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

MODS THAT WILL BE GOIN ON:

GTR fuel pump

GTR injectors 444cc with resistor pack

Adjustable fuel reg

s/s low mount manifold

T3/T4 turbo ( uses T4 .60 compressor housing with standard RB20 exhaust housing which has been machined out and fitted with a lager T3 steel exhasut wheel.

The standard ecu will aslo be rechipped by P.I.T.S to suite the upgrades

any have any idea of how much kw's I would be pulling @ wot psi with these upgrades b4 I get it dynoed???

also any feedback would be good on other mods I may need to support the mods that are goin on.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/68953-estimated-kws-for-these-mods/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

  boosted_32 said:
Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

Ok please correct me if i am wrong but isnt 250rwhp a bit optimistic from a standard turbo with standard fuel system out of an rb20? or do u have an rb25??

I had mine dynoed at P.I.T.S the other day and got 185 rwhp with the identical mods, matti said his dyno reads 10% low so it works out at around 200rwhp....he said this is quite good for a standard turboed rb with my mods (including 14.7psi)....

any thoughts??

Trev

  boosted_32 said:
Hi guys im just about to do a mild upgrade on my R32 skyline and would like some feedback.

MODS CAR ALREADY HAS:

3" exhaust with 3" s/s dump

Big 600x300x80 intercooler with 3" piping

electronic boost controller

BOV

POD

(Made 250rwhp @ 1bar with stock turbo)

Thanks

power seems high for these mods.

this rb20 or rb25?

edit: beat me to it

Hi guys I can guarantee you that my car being an R32 skyline with the RB20DET was dynoed at 250rwhp well actually 249.1rwhp that’s also with 150,000kms on the clock as well. So hopefully by adding the other mods at the same boost of 1 bar should bring me close to 250rwkw. Any more feedback would be appreciated

Thanks

Mine is being tuned today, and with a hi flow turbo think it'll strain to get 200 rwkws, with all the mods you've listed as well.

I'd expect around 260 - 280 hp with the new mods you've listed, but thats what you already had......

  silver gts-t said:
there has to be something else,  

sure the turbo isnt from rb25??

computer chipped???

dyno exaggerated?

Mate I was there when it was dynoed and there is nothing wrong with his dyno at all he was quiet shocked at the time cause he said he has dynoed a few other 32's b4 will thos basic mods that didnt pull that sorta hp it was ran twice on the dyno 1st time was the 249.1rwhp and 2nd time was 248rwhp maybe cause it was hotter the 2nd time. The only mods at the time of the dyno was the 3"zorst with 3"s/s dump eletronic boost controller set @ 1 bar BOV, POD and Front mount. has a blitz accsess ECU now but was not on that at the time of dyno. will let you know what shes runs after all the new mods have been put on anyway.

Thanks

damn those rb25 turbos must be pretty sweet upgrade for that figure even with a stock cooler! :)

Does it bolt straight up and does it need a new dump pipe or anything??

One more thing.. what u mean now u have 5 stud hubs? Do you have a r32? They come wit 5x114.3 standard, so what u mean now u have...?

i have rb20det in an silvia.. with 'stock' CA brakes*worst nissan brakes EVER* hence the reason im doin 5stud conversion with r33 GTST brakes all round than the front mount is goin in

it also bolts straight on dont have to change anything how ever i had a custom system made up from turbo back 3" straight thru split dump one 3inch straight thru cannon at the back with 4 inch tip split dump has 3inch for turbine and 1.5inch pipe for actuator flap

My mate had and RB20 in a silvia and it had the stock RB20 turbo and running no boost as it didnt have a controller and all it had was an exhaust and he smoked me. becuase they are about 300kg lighter then an R32 skyline.

  Wazz said:
boosted_32.. is your name andrew? :) is your 32 black? and do you live in cairns?  

well yer i got a mate with a r32 gtst same as much just stock turbo running 13psi while i run 10 psi.. and yer i hose him the weight makes a huge difference

No my name isnt andrew and I live on the Gold coast

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...