Jump to content
SAU Community

Recommended Posts

8litres of oil!! sh1t. maybe is a 4 cylinder and the other two bores are for oil storage...

seriously though, why so much capacity and why does it gets so hot. even when pounding my GTR round the track with the oil cooler and a measly ~6litre system capacity it only gets to around 90degrees. water temp gets to ~82.

does it have a big arse sump?

Install an oil cooler Kabab.

There's your answer. Oil cooler makes a big difference in oil temps.

Install an oil cooler Kabab.

There's a fair bit of difference between your engine and Kabab's engine :P I don't think they're really comparable. The difference in heat that an RB26 generates between 230awkw/250rwkw (yours) and 320awkw (kabab's) is MASSIVE.

Install an oil cooler Kabab.

There's no cooling problem, other than the need for an oil cooler. It's a well known fact that RB26 heads have a major problem with heat dissipation. Just ask Mario, he knows all about it :);) ;)

Install an oil cooler Kabab.

  • Replies 162
  • Created
  • Last Reply

Top Posters In This Topic

John quoted me for 8L :squint:

He charged me for 2x 5L bottles of Castrol, and gave me the remainder of the oil from the second bottle that he didn't use. I think I still may have some left over in the garage somewhere...

Castrol Forumla R 10w60 is what they use in all their big HP engines, including Mario's sh1tbucket, so I deemed it adequate for the purple di1do.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...