Jump to content
SAU Community

Recommended Posts

Does ne1 know of a way to may the lights on my R33 clear again it looks filthy when you turn them on!!!

The plastic has faded and is starting to crack =(

I have heard of plastic polish does ne1 know if this works?

Does ne1 know where i can get a replacement set for a decent price as i have been quoted $1000 for a new set!!! =(

Link to comment
https://www.sau.com.au/forums/topic/69345-fixing-cracked-and-faded-lights/
Share on other sites

I use Meguiars ScratchX and it does the job nicely. It's a little bit pricey (about $20 a tube), but bonus is that you can use it on the rest of the car as well to get rid of light scratches, whereas you cannot with other things like plastic polish, toothpaste, Gumption etc.

  • 6 months later...
  • 1 year later...

I do this at work, bit scary at first but it works.... If they're really bad, sandpaper first.... work your way up through the grades of wet and dry to 1500 or 2000.... then silicone free polish. Takes about an hour a pair, even on the worst condition lights.

  • 2 weeks later...

Try using silvo from Coles or woolies. about $8 for a can that will last you two lifetimes.

Using a cotton cloth... put some on it then rub in small circles with pressure.

Then buff off with a clean cotton rag.

Finally, to help protect the finish... add some car polish and then polish off as per usual.

This will cure the fading/yellowing problem but not the cracking.

Plastic gets old and doesn't like the sun... it cant be helped.

Edited by negoshi8or

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
×
×
  • Create New...