Jump to content
SAU Community

Bass takes a big step

Bass Junky

By Bass Junky,
in Victoria

 Share

Recommended Posts

Bass Junky Grand Master

Bass Junky

Posted
Posted

Hey ppls.

Some may already know, but most not.

I went on Holidays last week to a little island in the South China Sea called Tioman. Highly recommend it by the way.

Anyway, whilst I was over there I popped the big question to my lovely girlfriend, who, being faced with a great big rock set in platinum, of course, said yes.

So, now I'm engaged to get married.

Probably early 2007! Maybe I could have a trio of the new GTR's at the wedding????????

Anyway, I'm just stoked, so I thought I'd share it with SAU

Bass out.

Any guesses as to the Wedding cars?

Link to comment
Share on other sites
NS2500 Experienced

NS2500

Posted
Posted

Congratulations mate. Lots of fun to come ahead! (if you're planning a big one)

We're getting married in November, but we've opted out of using Skylines - the bride/bridesmaids can't go climbing in through the passenger seat and into the back. It's just not practical. :( Can you imagine the drama of the bride getting snagged or greased from the seat rail?!

We're going 4 Ford Territorys for something different. :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      AC Compressor

      By GTSBoy · Posted

      You don't need an AC mechanic to fit it. You do need one to vac the system down and fill it. That's how you get refrigerant.
    • GTSBoy
      Anti Squat Kit

      By GTSBoy · Posted

      Well, it's actually probably worse than you think. I think you have to (minimally) install GKTech's spherical bush replacements to the lower arm's inner ends, because you absolutely cannot subject the original (or poly) bushes to that much misalignment. The better option being to replace the whole lower arm with GKTech's unit. This brings sphericals to the lower inners either way you do it. And are you aware that the kit is weld in and you have to take the subframe out of the car to get it fitted? It's a fair bit of work. These issues both drive my ongoing dithering about doing this to my car, for the last couple of years.
    • kevboost7
      AC Compressor

      By kevboost7 · Posted

      The website said you need a AC technican to swap it in. Is that true? How did you fill the refridgerant? Was it easy to install?  If i just got the bracket and the new smaller AC compressor, would the other components be compatible with R134?
    • ianp
      Anti Squat Kit

      By ianp · Posted

      Hi All Finally getting back to work on the R32 this weekend and had a quick question about the GKTech anti squat kit (https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=39&_fid=eb6b5077e&_ss=c) So, this straightens out the rear LCA and increases the roll centre by 20MM which is great BUT I also have MFR roll centre adjusters (https://www.rhdjapan.com/moonface-super-lap-rc-joint-roll-center-adjuster-bnr32-ps13-rps13.html) which gives a +15MM lift. My question is whether they can/should be used together or if its going to massively effect the geometry? In my mind, I can't see that they work together but was hoping for some feedback on someone who has done this before deciding which to use or if both?   Thanks
    • TurboTapin
      Rb25 into r31/wont idle

      By TurboTapin · Posted

      Agreed. Thing has to be running absolutely pig rich as well. I would worry a lot less about your idle and start going through all your electrical before the car burns down. 
×
×
  • Create New...