Jump to content
SAU Community

Recommended Posts

Have an R34 GT-t which has had its headlights converted to standard halogen units on import (H1 12V 55W low-beam bulbs). It has a sticker saying "do not convert back to gas discharge" and the correct bulb type engraved into the plastic housings.

I've had the car for a couple of months now and have gone through 5 low-beam bulbs. Both sides are intermittently blowing, seemingly randomly. One night I'll pull up and notice one side is out (parkers and high-beams still working). The car is pretty standard, and electronically it's had an alarm system fitted but is otherwise stock - no extra spotties, computers or massive sub amps etc.

The seals seem ok on my headlights and no moisture seems to be getting in... The suspension is pretty rough (coilovers) but I'm not driving it that hard on the road.

Any ideas, anyone? Apart from throwing my wallet in the general direction of an auto electrician??? :rofl:

(and yes I've searched the forums prior to posting...) :D

Link to comment
https://www.sau.com.au/forums/topic/69454-help-r34-headlights-keep-blowing/
Share on other sites

Have an R34 GT-t which has had its headlights converted to standard halogen units on import (H1 12V 55W low-beam bulbs). It has a sticker saying "do not convert back to gas discharge" and the correct bulb type engraved into the plastic housings

Just from that info I know EXACTLY who did the conversion, contact the dealer and I'm sure they'll give you his details...he'll probably take a look for you to see if it's all OK.

Have an R34 GT-t which has had its headlights converted to standard halogen units on import (H1 12V 55W low-beam bulbs).  It has a sticker saying "do not convert back to gas discharge" and the correct bulb type engraved into the plastic housings.

I've had the car for a couple of months now and have gone through 5 low-beam bulbs.  Both sides are intermittently blowing, seemingly randomly.  One night I'll pull up and notice one side is out (parkers and high-beams still working).  The car is pretty standard, and electronically it's had an alarm system fitted but is otherwise stock - no extra spotties, computers or massive sub amps etc.

The seals seem ok on my headlights and no moisture seems to be getting in...  The suspension is pretty rough (coilovers) but I'm not driving it that hard on the road.

Any ideas, anyone?  Apart from throwing my wallet in the general direction of an auto electrician???  :rofl:

(and yes I've searched the forums prior to posting...)    ;)

Its a very dodgy conversion , take it back to them , it sounds like you have a short somewhere .

If you want to fix it yourself , take the globes out and have a look at the fiting , they probably used the xenon fiting and just put halogen globe in that .

If thats the case its probably shorting on the housing somewhere .

I dont know how you guys with converted xenons can see anything at night , they are pathetic .

If i was you i would get rid of them and reinstall xenons , then you will see the light .

  • 2 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had never actually looked into it, but aren't onboard compressors a thing in trucks?
    • Read the ECU for fault codes or have someone else do it. A faulty coolant temperature sender is usually listed in ECUs. If the sensor itself is not busted it can also be a bad ground connection. Or in a really unlucky case, damaged wiring.
    • Can't be a Futjitsubo as those are made with a flex piece and Reimax is smaller in pipe diameter. If anything it is closest to a Mines pipe, but evidently it is not an actual Mines pipe.   Classic word humor
    • Alright I will try to not forget.   As GTSboy replied to you already, problem is mainly the mismatch between the actual exhaust part and the denomination in the papers. That basically just looks like tampering to a cop, if they were to check your car and notice. If it had been done right they would have clarified it to be a custom pipe and just given it a certain part number that you have to engrave or weld onto the pipe. I will definitely inquire on what to do. Changing the pipe wouldn't be my favorite solution as it costs a bunch of money and the cat was fitted with the front pipe and exhaust under the car, and if the front pipe flange does not sit in the OEM location the cat will need to be refit for any other pipe to work. It also usually doesn't need a brand name or something like that, but more something like a part number. Usually for exhaust parts, on silencers and cat units specifically, there is a badge that reads the certificate number that belongs to these exhaust parts under EU regulation. You get these numbers after you put a part or group of parts through the tedious testing according to EU vehicle legislation and they pass. You can find these "part numbers" on various parts throughout a EU vehicle. On windows, headlights, engine parts, seat belts and so on. All these parts have gone through standardized testing and acquired a so called ECE or EG Certificate that makes them legal to use by themselves in all countries that adhere to these standards. You can also not alter these parts in any way, if you do they become illegal. An example for stampings on an exterior lighting part, the people who need to know can find the documentation for this unit in a database. I do not know what all the standards and so on mean.
    • If that was the case I suppose you could call it "Mein's" brand....  ... I'll see myself out... 😅
×
×
  • Create New...