R32 & R33 (Series 1) Z32 Airflow Meter Wiring Guide

[nizmo_freek]

Just finished wiring up my z32 afm using a tomei plug, was easy as after reading this thread ,one thing i did notice was my "signal" wire on my loom was orange and blue instead of orange and black, my car is a 98 r33 so it might possibly be a little different or it could have been rewired sometime before i owned it, i tested it and yes it is was the signal wire.

Also just to clear up for series 2 owners about joining the 2 grounds together, i joined wire c (12v ground on the z32 afm) and wire d (signal ground on the z32 afm) together and then joined that up to the white+blue wire (ground) on my stock loom and it seems to work fine, car idles perfect and dosent seem to run to rich ,i didnt want to take it for a drive though but im pretty sure it is working perfectly!

Anyway thanks to all the people that put up this info, it was very helpfull!

Cheers

Edited March 6, 2008 by nizmo_freek

[GTR_Legend]

Wired up my z32 afm with Tomei plug today.

As per nismo_freek, my 1996 S2 signal wire was orange & blue instead of orange and black.

also joined wire C & D to ground.

[REEMER_31]

WAS IT THAT HARD TO DO FOR THE REST OF US!!!?? rofl, too much talk not enough pretty pictures, GO THE Rb 25det !!! GO BOY!!!

Edited March 8, 2014 by REEMER_31