Jump to content
SAU Community

Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

yep, those photos seem to turn up all over the place. Go the r34, awesome car, looks better, better technology compared to most western cars and a better investment since fords and most local cars lose there value alot quicker than imports. Only problem is parts and service, however japanese cars don't break down as much as the fords or holdens. Power can't really be compared since its 2.5ltr turbo vs a 4ltr turbo - the nissian is still just as fast though.

XR6T would absolutly hose an R34GTT 4door stock! abo bob, is your car stock or modded? did the ford guy really nail it?

I've driven the series 2 and it is awesome for a local car ;) I took it down to batemans bay and back from Canberra (via the clyde) and found it stuck to the road exceptionally for a 'big heavy car' . my only complant - the stock seats, they need to be changed to something more akin to GTR seats i.e Recaros or the like.

stopped, turned and performed very well + it was a heap of fun. I found it gave great driver feedback, but I felt I was not sitting in it, rather on it - again, the seat...

Have a look at the power they are pulling from these monsters with a modest amount of cash!

I'd have one, but I would opt for the upspec brakes and get recaros in the front.

Buy the ford :)

XR6T would absolutly hose an R34GTT 4door stock!

I agree with this DANOOH. The XR6T has better power to weight ratio. I would imagine that the 4.0L engine would allow the car to keep pulling very hard at high speed too.

Thanks for the comments everyone. I have a bit more to add to this thread now, but my descision is still not made.

I haven't compared both back to back but I have driven both now and power aside, all I can say is the Skyline looks and feels much better on the road in every aspect. The R34 GTT 4 door leaves an impression on you that it is a true "hi-performance sports car" where as the XR6T looks and feels like a "Family Sedan with stiffer suspension".

Its funny because I was finding it hard to put my finger on the differences in these cars. But it is so true what I have siad above, when you sit in the XR6T it feels like any other post 97-98 Aussie sedan, despite the obvious effort put into making the interior feel sporty. Just driving the XR6T around in stop and go traffic (believe it or not) you can really feel the weight (1664Kg) that the engine is lugging around although under hard acceleration the falcon sheds this weight like it was never there in the first place. You are then quickly reminded of the cars weight when you come to brake, its not like the standard brakes can't cope they just feel like in an extreme situation they might let you down.

The R34 GTT is no GTR but its a "real drivers car" in every sense of the words. It feels like it could out corner and out brake the XR6T in ANY situation. Yep there really is that much difference. What keeps one such as myself thinking about the XR6T is the sheer grunt the engine has and when you plant the foot the push in the back of your seat is very, very strong!

One other point is the number of GTTs getting around ATM. Today I spotted 4 XR6Ts on the way into the city, another 3 or so XR6 or XR6Ts when I was in the city. Then I saw another 4 or 5 of them on my way home. They are quite common now. On the other hand I saw no GTT's today, although I am sure they are around they are nowhere near as common.

XR6T would absolutly hose an R34GTT 4door stock! abo bob, is your car stock or modded? did the ford guy really nail it?

I've driven the series 2 and it is awesome for a local car ;) I took it down to batemans bay and back from Canberra (via the clyde) and found it stuck to the road exceptionally for a 'big heavy car' . my only complant - the stock seats, they need to be changed to something more akin to GTR seats i.e Recaros or the like.

stopped, turned and performed very well + it was a heap of fun. I found it gave great driver feedback, but I felt I was not sitting in it, rather on it - again, the seat...

Have a look at the power they are pulling from these monsters with a modest amount of cash!

I'd have one, but I would opt for the upspec brakes and get recaros in the front.

Buy the ford :)

My car was stock at the time but not anymore. He definitely nailed it but we only went up to about 100 km/h. I'm not saying there was much in it.

At the next stop he wound his window down and accused me of having mods done. I said I guessed it was all power to weight.

I notice 16xx kgs quoted above, I thought they were more like 18xx but anyway.

Stock GTT is a little bit asthmatic in the last 500 rpm before redline but I'm not sure about the fords.

One thing I noticed when my car was stock was that it seemed that I beat everyone by having an engine happy to rev out to 7000rpm. What's the fords redline?

My opinion is that i would go the r34 probably more for the fact that they are more rare and i think they look more aggressive and sportier..

Basically the xr6t seems more like a family car that been injected with some roids... however i reckon ford has finally made a falcon that looks a hell of a lot more impressive than previous falcons!! cause i do think the xr6t look alright... but no way as good as the 34.

I dont think you would regret buying either one, so like they say... follow your heart.... (and get the r34)

hehe

What's the fords redline?

On the dash it has no Redline! That was one of the wierd things I asked the dealer about, but I have since confrimed that it is normal. Regardless the XR6T starts to cut around the late 5,000 rpm mark but peak torque of 450nm is made at latest by 4,000 rpm.

so like they say... follow your heart.... (and get the r34)

yeah I am really like a pendullum at the moment!! At times the 34 really feels like the only choice (being a skyline lover through and through....) its just the falcon is hard to ignore with the specifications.

There's a lot of Falcons on the road, be they XR6, XR6T or XR8 so you're not really going to stand out. Not that that will or should influence your opinion, but still. I'd take the R34, it'd probably give you better fuel economy and stuff as well.

The XR6T is a family car trying to be a sports car.

The R34 GT-T 4 door is a sports car that fits the family :burnout:

I have a mate with an XR6T ute, goes great. Been in the shop a lot though for a new car. He had front rotors, a gearbox bearing and a problem with the tailgate closing..

do you want a car with high build quality, unique/excellent looks, high reliability, a car that integrates the driver with nice feedback OR

do you want a car that looks a little nicer than a standard falcon, has poor reliability (Mk1's), is not so integrated from a drivers perspective, but goes very fast in a straight line with more potential... in a straight line

"real drivers car" is why i went GTT

im getting an xr6t , upgrading from a r33 4door line , ive looked extensively at the 34s .

if you want to stand out get a 34 , if you want stealth get the xr6t . If you never want to be pulled over and get defected get a t .

if you want cheap insurance and parts get the t .

if you want to drift get the 34 . if you want drag get the t . if handling is your thing get the 34 , if massive power is it then get the t .

if you want a practical sedan get the t , if you want a sports car thats a bit more handy than a normal coupe get the 34

they are 1730kg in auto form , about 20-30 less in manual . they actually have fairly advanced suspension setups and handle well for a car of that size and weight but sooner or later that weight does have an impact .

sitting on the xr6t forums a fair bit theres actually not that much that goes wrong with them in the main part . the main issue is the T5 gearbox in the series I , it will never handle 450nm of tourqe well and will die with small upgrades . the auto is a better pick and can be built to handle the output of a 350rwkw upgrade for about 3k . The T56 in the series II is much better but a moded t will need a mega clutch and some strengthening still you could have got a cheaper auto and put that money strait into the gearbox . Budget about 6.5-8k for a stengthened 6 speed if you get a manual 5 speed and want to go modding . im sure it would be a lovely car though .

personally , im looking for a practical car for a growing family that I can have fun with , primarily drag . for about 8-10k there are kits to produce 350rwkw and run 12s on street tyres . looking at the HPI r34 they spent alot more than 10k to get that to run 12s .

do you want a car with high build quality, unique/excellent looks, high reliability, a car that integrates the driver with nice feedback OR

All positives here ...... hmmm......thinking answer = Yes

do you want a car that looks a little nicer than a standard falcon, has poor reliability (Mk1's), is not so integrated from a drivers perspective, but goes very fast in a straight line with more potential... in a straight line

Negatives.......Positives..........and everything in between hmmm answer = No

Skyline is looking up ;)

BTW does anyone know if an 03 XR6T is a Mk1 or series 1?

Sorry Arkon, you must have written that post super quick while I was stuffing around with my last post, because I didn't see it a minute ago? Thanks for the info mate, and yeah I have registered as a user on fordXR6Tubro.com just to use the search feature to do my research.

I agree with everything you have said basically just a couple of questions:

Just curious though have you taken a stock GTT 4 door tip-tronic for a test drive? Also do you know exact differences in Quarter mile times betwenn these cars?

1730kg in auto form

are you sure? can you point me too a reliable source on this becuase I have a spec sheet that I downloaded that said 1664kg and that was in an Auto 2003 model.

drive says 1,694kg , carpoint says 1690kg for manual series II . most of the forums seem to talk about 1700kg , so yea about 1730ish for auto the auto being 30kg heavier roughly . ford have no weight listed on their website which is strange . series I is a little lighter I think , dont know about 80kg , 1664 would sound more like a manual sI .

i have driven 1 r34 triptronic sedan , it was a very nice car . dont get me wrong I love the line and its a great car , if you want a thrashy sports car but need 4 doors now and then get the 34 . but if you want a practical sedan then the t is much better . and if you want BIG power then defietly get the T . If you want something to just do a exhaust and intercooler and a bit of boost then stick with the 34 . The T responds to those basic mods just as well but it excells in making big power in the realms that would start to get very expensive with an rb25 and to me thats when the positives start to outweight the negetives like big weight and size and plainer exterior .

I havent seen any oficial 1/4s but some owners have said 14 flats for their stock auto t's . No idea on the r34 , given the worse power to weight id expect slightly slower over the 1/4 but maybe quicker to 100km given the weight difference .

Who could say no to those R34 tail lights?

Ford's and Holden's do nothing for me in terms of looks.  

In most cases I can't distinguish Fords from one another.  XR6, XR6T, XR8 all look the same but for the badging.  

Go the Skyline!

thats the idea ! Im ripping the turbo badge off , ill even be able to park that thing in the street !

with 2 kid seats in the back no cop will ever look twice . who would expect the family falcon actually ran 12s and did 350rwkw ;)

make sure you get a blueprint blue , cause then youve got the most common colour too .

Who could say no to those R34 tail lights?

I'm finding it hard to fight, believe me.

drive says 1,694kg , carpoint says 1690kg for manual series II . most of the forums seem to talk about 1700kg , so yea about 1730ish for auto the auto being 30kg heavier roughly . ford have no weight listed on their website which is strange . series I is a little lighter I think , dont know about 80kg , 1664 would sound more like a manual sI .

So it sounds like it is at least as heavy as I thought, but maybe heavier, which brings the power to weight ratios even closer together....interesting..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...